3Com MSR 30, MSR 50 manual Display mpls te link-administration admission-control

1592 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
[6]	:	0	(kbps),	[7]	:	0	(kbps)
BW Unreserved		for Class type 1:
[0]	:	0	(kbps),	[1]	:	0	(kbps)
[2]	:	0	(kbps),	[3]	:	0	(kbps)
[4]	:	0	(kbps),	[5]	:	0	(kbps)
[6]	:	0	(kbps),	[7]	:	0	(kbps)

Table 410 Description on the fields of display mpls te cspf tedb interface

Field	Description
MPLS LSR-Id	MPLS LSR ID of node
IGP_Type	IGP type
Process Id	IGP process ID
MPLS-TE Link Count	Number of MPLS TE links
Link[x]	Specific link, with the bracketed x indicating the
	link number
Interface IP Address	Interface IP address
DR Address	IP address of the DR
IGP Area	IGP area
Link Type	Link type
Link Status	Link status
IGP Metric	IGP metric of link
TE Metric	TE metric of link
Color	Link administrative attribute
Maximum Bandwidth	Maximum link bandwidth
Maximum Reservable Bandwidth	Maximum reservable bandwidth of link
Bandwidth Constraints	Bandwidth constraints
BW Unreserved for Class type0	Unreserved bandwidth at the CT0 level
BW Unreserved for Class type1	Unreserved bandwidth at the CT1 level

display mpls te link-administration admission-control

Syntax	display mpls te link-administration admission-control [ interface interface-type
	interface-number ]
View	Any view
Parameter	interface interface-typeinterface-number: Specifies an interface by its type and a
	number.
Description	Use the display mpls te link-administration admission-control command
	to display information about CR-LSPs carried on the link of a specified interface or
	links of all interfaces if no interface is specified.
Example	# Display information about the CR-LSPs carried on the links of all interfaces.
	<Sysname> display mpls te link-administration			admission-control
	LspID	In/Out IF	S/H Prio	CT	BW(kbps)