3Com MSR 50 Mpls ldp remote-peer, Mpls ldp timer hello-hold, Related command remote-ip, 1551

1551

mpls ldp remote-peer

Syntax mpls ldp remote-peer remote-peer-name

undo mpls ldp remote-peer remote-peer-name

View System view

Parameter remote-peer-name: Name of the remote peer, a case-insensitive string of 1 to 32 characters.

Description Use the mpls ldp remote-peercommand to create a remote peer entity and enter MPLS LDP remote peer view.

Use the undo mpls ldp remote-peercommand to remove a remote peer entity.

Related command: remote-ip.

Example # Create a remote peer entity named BJI.

<Sysname> System-view

[Sysname] mpls ldp remote-peer BJI

[Sysname-mpls-ldp-remote-bji]

mpls ldp timer hello-hold

Syntax mpls ldp timer hello-hold value

undo mpls ldp timer hello-hold

View Interface view/MPLS LDP remote peer view

Parameter value: Length of time for the Hello timer, in the range 1 to 65,535 seconds.

Description Use the mpls ldp timer hello-holdcommand to set the Hello timers.

Use the undo mpls ldp timer hello-holdcommand to restore the defaults.

In interface view, you configure the link Hello timer; in MPLS LDP remote peer view, you configure the targeted Hello timer.

By default, the value of the link Hello timer is 15 seconds, while that of the targeted Hello timer is 45 seconds.

n Changing the values of the Hello timers does not affect any existing session.

Related command: mpls ldp (system view), mpls ldp (interface view).