3Com MSR 50, MSR 30 manual Local-user password-display-mode, Password

1941

local-user password-display-mode

Syntax	local-user password-display-mode { auto cipher-force }
	undo local-user password-display-mode
View	System view
Parameter	auto: Displays the password of an accessing user based on the configuration of
	the user by using the password command.
	cipher-force: Displays the passwords of all accessing users in cipher text.
Description	Use the local-userpassword-display-modecommand to set the password
	display mode for all local users.
	Use the undo local-user password-display-mode command to restore the
	default.
	The default mode is auto.
	With the cipher-forcemode configured,
	■ A local user password is always displayed in cipher text, regardless of the
	configuration of the password command.
	■ If you use the save command to save the configuration, all existing local user
	passwords will still be displayed in cipher text after the device restarts, even if
	you restore the display mode to auto.
Related command: display local-user,password.
Example	# Specify to display the passwords of all accessing users in cipher text.
	[Sysname] local-user password-display-mode cipher-force

password

Syntax	password { cipher simple } password
	undo password
View	Local user view
Parameter	cipher: Specifies to display the password in cipher text.
	simple: Specifies to display the password in simple text.
	password: Password for the local user.