3Com MSR 30, MSR 50 manual Rtpq, Undo pvc-pq, Fr pvc-pq, Number, in the range 2000 to, 1000000

1894 CHAPTER 125: FR QOS CONFIGURATION COMMANDS

	undo pvc-pq
View	Frame relay class view
Parameters	top: Sets the top PVC PQ , namely, top priority queue, to accept the packets from
	the VC.
	middle: Sets the middle PVC PQ , namely, middle priority queue, to accept the
	packets.
	normal: Sets the normal PVC PQ , namely, normal priority queue, to accept the
	packets.
	bottom: Sets the bottom PVC PQ , namely, normal priority queue, to accept the
	packets.
Description	Use the pvc-pqcommand to set the type of the PVC PQ that packets sent by FR
	virtual circuit enter.
	Use the undo pvc-pqcommand to restore the default PVC PQ type.
	By default, the packets sent by FR virtual circuit enter into the normal PVC PQ.
	PVC PQ falls into four groups: top, middle, normal and bottom. PVC PQ is
	relative to DLCI. After the queue of an interface is set as PVC PQ, packets on each
	virtual circuit can enter only one type of PVC PQ.
Related commands:	fr pvc-pq.
Examples	# Set packets sent by virtual circuit which is associated with the FR class named
	test1 to enter top PVC PQ.
	<Sysname> system-view
	[Sysname] fr class test1
	[Sysname-fr-class-test1] pvc-pq top

rtpq

Syntax	rtpq start-portmin-dest-port end-portmax-dest-port bandwidth bandwidth
	undo rtpq
Parameters	start-portmin-dest-port: Specifies the lower limit for the destination UDP port
	number, in the range 2000 to 65535.
	end-portmax-dest-port: Specifies the upper limit for the destination UDP port
	number, in the range 2000 to 65535.
	bandwidth bandwidth: Bandwidth of a RTP queue, in kbps, ranging from 8 to
	1000000.