3Com MSR 30, MSR 50 Cptone tone-type, Effect on all voice interfaces of all cards on the device

2566 CHAPTER 173: VOIP CONFIGURATION COMMANDS

Description	Use the cptone country-typecommand to configure the current device to play
	the call progress tones of a specified country or region or play the customized call
	progress tones.
	Use the undo cptone country-typecommand to restore the default.
	By default, the call progress tones of China are specified.
	CAUTION: The configuration of the cptone country-typecommand will take
c effect on all voice interfaces of all cards on the device.
Example	# Configure the device to play the call progress tones of US.
	<sysname> system-view
	[sysname] voice-setup
	[sysname-voice] cptone country-type us
cptone tone-type
Syntax	cptone tone-type { all busy-tone congestion-tone dial-tone ringback-tone
	special-dial-tone waiting-tone } amplitude value
	undo cptone tone-type { all busy-tone congestion-tone dial-tone ringback-tone
	special-dial-tone waiting-tone } amplitude
View	Voice view
Parameter	all: All types of call progress tones.
	busy-tone: Busy tone.
	congestion-tone: Congestion tone.
	dial-tone: Dial tone.
	ringback-tone: Ringback tone.
	special-dial-tone: Special dial tone.
	waiting-tone: Call waiting tone.
	amplitude value: Specifies the amplitude of a progress tone, which ranges from
	200 to 1,500.
Description	Use the cptone tone-typecommand to configure the amplitude of the specified
	call progress tones.

Use the undo cptone tone-typecommand to restore the default.

By default, the amplitude of busy tone and congestion tone is 1000, that of dial tone and special dial tone is 400, and that of ringback tone and call waiting tone is 600.