3Com MSR 50, MSR 30 Debugging bgp update l2vpn, Update messages of IPv6 address family, Verbose

1029

MED	: 0
Origin	: Incomplete
AS Path	:
Next Hop	: 100::2
22::22/128,

*Sep 4 16:17:20:708 2006 Sysname RM/6/RMDEBUG:

BGP_IPV6.: Recv UPDATE from peer 100::2 with following destinations :

Update message length : 78

Local Pref	: 100
MED	: 0
Origin	: Incomplete
AS Path	:
Next Hop	: 100::2
100::/64,

// Update messages of IPv6 address family

debugging bgp update l2vpn

Syntax	debugging bgp update l2vpn [ peer { ipv4-addressgroup-name} ] [ receive send ]
	[ verbose ]
	undo debugging bgp update l2vpn [ peer { ipv4-addressgroup-name} ] [ receive
	send ] [ verbose ]
View	User view
Default Level	1: Monitor level
Parameters	peer { ipv4-address group-name}: Enables/disables BGP L2VPN Update message
	debugging for the specified peer/peer group.
	receive: Enables/disables the debugging for received BGP packets.
	send: Enables/disables the debugging for sent BGP packets.
	verbose: Displays detailed debugging information.
Description	Use the debugging bgp update l2vpn command to enable debugging for BGP
	L2VPN Update messages.
	Use the undo debugging bgp update l2vpn command to disable debugging
	for BGP L2VPN Update messages.
	By default, this debugging is disabled.
	Enabling debugging may affect system performance; therefore, use this command
	only when necessary and disable debugging once the debugging operation is
	complete.