3Com MSR 50 X25-template, X25 template, Syntax x25-template name Undo x25-template name, 409

409

[Sysname-Serial2/0] fr interface-type dte

[Sysname-Serial2/0] timer hold 15

x25-template

Syntax x25-template name

undo x25-template name

View DLCI interface view

Parameter Name: Name of an X.25 template, a string of 1 to 30 characters.

Description Use the x25-templatecommand to apply an X.25 template to a VC.

Use the undo x25-templatecommand to remove the X.25 template applied to a VC.

Annex G implements X.25 over FR. You can configure X.25 parameters for an

X.25 over FR DLCI using the x25 template command and apply the template in

DLCI interface view.

Example # Apply the X.25 template named “vofr” to DLCI 100.

<Sysname> system-view [Sysname] interface serial 2/0 [Sysname-Serial2/0] fr dlci 100

[Sysname-fr-dlci-Serial2/0-100] x25-template vofr

x25 template

Syntax x25 template name

undo x25 template name

View System view

Parameter Name: Name of an X.25 template, a string of 1 to 30 characters.

Description Use the x25 template command to create an X.25 template or enter X.25 template view.

Use the undo x25 template command to remove an X.25 template.

As for the x25 template command, if the X.25 template identified by the name argument already exists, this command leads you to X.25 template view.

X.25-/LAPB-related parameters are configured in X.25 template view.

Example # Create an X.25 template named “vofr”.