3Com MSR 50, MSR 30 manual Display clock, Display configure-user, Syntax display clock

2411

Description Use the display clipboard command to view the contents of the clipboard.

To copy the specified content to the clipboard:

■Move the cursor to the starting position of the content and press the <Esc+Shift+,> combination (“,” is an English comma).

■Move the cursor to the ending position of the content and press the <Esc+Shift+.> combination (“,” is an English dot) to copy the specified content to the clipboard.

Example # View the content of the clipboard.

<Sysname> display clipboard

---------------- CLIPBOARD-----------------

ip route 10.1.0.0 255.0.0.0 eth 0

display clock

Syntax display clock

View Any view

Parameter None

Description Use the display clock command to view the current system time and date.

The current system time and date are decided by the clock datetime, clock summer-timeone-off(or clock summer-time repeating), clock timezone. Refer to the Configuring the system clock section in the operation manual for the detailed rules.

Related command: clock datetime, clock summer-timeone-off,clock summer-time repeating, clock timezone.

Example # Display the current time and date.

<Sysname> display clock

09:41:23 UTC Thu 12/15/2005

display configure-user

Syntax display configure-user

View Any view

Parameter None

Description Use the display configure-usercommand to display the users entering system view at the same time.