3Com MSR 50, MSR 30 manual If-match mpls-label, If-match route-type

1201

if-match mpls-label

Syntax	if-match mpls-label
	undo if-match mpls-label
View	Routing policy view
Parameters	None
Description	Use the if-matchmpls-labelcommand to specify the MPLS label match
	criterion.
	Use the undo if-matchmpls-labelcommand to remove the match criterion.
	The match criterion is not configured by default.
Examples	# Create a routing policy named policy1 with node 10, matching mode as permit.
	Match MPLS label of routing updates.
	<Sysname> system-view
	[Sysname] route-policy policy1 permit node 10
	[Sysname-route-policy] if-match mpls-label

if-match route-type

Syntax	if-match route-type { internal external-type1 external-type2 external-type1or2
	is-is-level-1 is-is-level-2 nssa-external-type1 nssa-external-type2
	nssa-external-type1or2 } *
	undo if-match route-type [ internal external-type1 external-type2
	external-type1or2 is-is-level-1 is-is-level-2 nssa-external-type1
	nssa-external-type2 nssa-external-type1or2 ] *
View	Routing policy view
Parameters	internal: Internal routes (OSPF intra-area and inter-area routes).
	external-type1: OSPF Type 1 external routes.
	external-type2: OSPF Type 2 external routes.
	external-type1or2: OSPF Type 1 or 2 external routes.
	is-is-level-1: IS-IS Level-1 routes.
	is-is-level-2: IS-IS Level-2 routes.
	nssa-external-type1: OSPF NSSA Type 1 external routes.
	nssa-external-type2: OSPF NSSA Type 2 external routes.