3Com MSR 30, MSR 50 Vam server vpn, Syntax vam server vpn vpn-name Undo vam server vpn vpn-name

1730 CHAPTER 99: VAM SERVER CONFIGURATION COMMANDS

By default, listening IP address and UDP port number are not configured.

Note that the VAM server only accepts the connections of all VPN domains through the configured UDP port.

Related command: vam server vpn

Example # Configure the listening IP address to 10.1.1.1 and UDP port number to 40000 for a VAM server.

<Sysname> system-view

[Sysname] vam server ip-address 10.1.1.1 port 40000

vam server vpn

Syntax vam server vpn vpn-name

undo vam server vpn vpn-name

View System view

Parameter vpn-name: VPN domain name. It is a case-insensitive string containing 1 to 15 characters, which can be A to Z, a to z, 0 to 9, hyphen sign, and dot sign.

Description Use the vam server vpn command to create a VPN domain and enter its view. If a VPN domain with the same name already exists, executing this command will enter the VPN domain view.

Use the undo vam server vpn command to remove a specified VPN domain.

By default, there is no VPN domain.

Example # Create VPN domain 1 and enter its view.

<Sysname> system-view

[Sysname] vam server vpn 1

[Sysname-vam-server-vpn-1]