3Com MSR 50, MSR 30 manual Fe1 unframed, Undo fe1 unframed

	237
View	E1-F interface view
Parameter	number number: Sets the number of interframe filling tags (an interframe filling
	tag is one byte in length). The number argument ranges from 0 to 14.
	type { 7e ff }: Sets the type of interframe filling tag to 0x7E by specifying the 7e
	keyword or to 0xFF by specifying the ff keyword. The default is 0x7E.
Description	Use the fe1 itf command to set the type of and the number of interframe filling
	tags on the E1-F interface. Two types of interframe filling tag are available: 0x7E
	and 0xFF.
	Use the undo itf command to restore the default.
	By default, the interframe filling tag is 0x7E and the number of interframe filling
	tags is 4.
	Interframe filling tags are sent when no service data is sent on the timeslots
	bundled into the logical channel on the E1-F interface.
Example	# Set the type of interframe filling tag to 0xFF on E1-F interface Serial 2/0.
	<Sysname> system-view
	[Sysname] interface serial 2/0
	[Sysname-Serial2/0] fe1 itf type ff
	# Set the number of interframe filling tags to five on E1-F interface Serial 2/0.
	<Sysname> system-view
	[Sysname] interface serial 2/0
	[Sysname-Serial2/0] fe1 itf number 5
fe1 unframed
Syntax	fe1 unframed
	undo fe1 unframed
View	E1-F interface view
Parameter	None
Description	Use the fe1 unframed command to configure the E1-F interface to work in
	unframed mode.
	Use the undo fe1 unframed command to configure the E1-F interface to work
	in framed mode.
	By default, the E1-F interface works in framed mode.