3Com MSR 30, MSR 50 manual Adsl tx-attenuation, Adsl standard auto g9923 g9925 gdmt glite t1413

144CHAPTER 6: ADSL INTERFACE CONFIGURATION COMMANDS

adsl standard

Syntax	adsl standard { auto g9923 g9925 gdmt glite t1413 }
	undo adsl standard
View	ATM (ADSL) interface view
Parameter	auto: Auto-negotiation mode.
	g9923: ADSL2 (G992.3) standard.
	g9925: ADSL2+ (G992.5) standard.
	gdmt: G.DMT (G992.1) standard.
	glite: G.Lite (G992.2) standard.
	t1413: T1.413 standard.
Description	Use the adsl standard command to set the standard applied to an ADSL
	interface.
	Use the undo adsl standard command to restore the default, that is,
	auto-negotiation.
	Note that:
	■ ADSL-I module does not support G.Lite (G992.2) standard and T1.413
	standard.
	■ To bring the standard configured by the adsl standard command into effect
	immediately, you need to re-activate the interface by either the shutdown and
	undo shutdown commands or the activate and undo activate commands.
Example	# Apply the standard T1.413 to ATM interface 2/0.
	<Sysname> system-view
	[Sysname] interface atm 2/0
	[Sysname-Atm2/0]adsl standard t1413
	[Sysname -Atm2/0] shutdown
	[Sysname -Atm2/0]undo shutdown

adsl tx-attenuation

Syntax adsl tx-attenuation attenuation undo adsl tx-attenuation

View ATM (ADSL) interface view