3Com MSR 30 Display isis interface, Traffic-eng Displays IS-IS traffic engineering information

1044 CHAPTER 74: IS-IS CONFIGURATION COMMANDS

Restart Interval: 150

SA Bit Supported

Total Number of Interfaces = 1

Restart Status: RESTARTING

Number of LSPs Awaited: 3

T3 Timer Status:

Remaining Time: 239

T2 Timer Status:

Remaining Time: 59

IS-IS(1) Level-2 Restart Status

Restart Interval: 150

SA Bit Supported

Total Number of Interfaces = 1

Restart Status: RESTARTING

Number of LSPs Awaited: 3

T3 Timer Status:

Remaining Time: 239

T2 Timer Status:
Remaining Time: 59
Table 234 Description on the fields of the display isis graceful-restart status command
Field	Description
Restart Interval	Graceful Restart interval
SA Bit Supported	The SA bit is set
Total Number of Interfaces = 1	The current IS-IS interface number
Restart Status:	Graceful Restart status
T3 Timer Status	Remaining time of T3 timer
T2 Timer Status:	Remaining time of T2 Timer

display isis interface

Syntax	display isis interface [ [ traffic-eng verbose ] * tunnel ] [ process-idvpn-instance
	vpn-instance-name ]
View	Any view
Parameters	traffic-eng: Displays IS-IS traffic engineering information.
	verbose: Displays IS-IS interface detail information.
	tunnel: Displays IS-IS tunnel information.
	process-id: IS-IS process ID, in the range of 1 to 65535.
	vpn-instance-name: VPN instance name, a string of 1 to 31 characters.
Description	Use the display isis interface command to view IS-IS enabled interface
	information.
	The information displayed by this command includes interface name, interface IP
	address, interface link state and so on. Besides all the information displayed by