3Com MSR 30, MSR 50 manual Authorization-did, Related command gw-access-numberand authentication

2726 CHAPTER 180: VOICE RADIUS CONFIGURATION COMMANDS

With this function enabled, called numbers will be sent to the RADIUS server for authorization after users who dial some access number to make IP calls pass authentication.

You must enable the authentication function (by using the authentication command) before the authorization function. Otherwise, the authorization command is unavailable.

Related command: gw-access-numberand authentication.

Example # Enable the authorization function for users who dial the access number 17909.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program

[Sysname-voice-dial] gw-access-number 17909 [Sysname-voice-dial-anum17909] authentication

[Sysname-voice-dial-anum17909] authorization

# Disable the authorization function for users who dial the access number 17909.

[Sysname-voice-dial-anum17909] undo authorization

authorization-did

Syntax authorization-did

undo authorization-did

View Voice AAA client view

Parameter None

Description Use the authorization-didcommand to enable the authentication function for all one-stage dialing users.

Use the undo authorization-didcommand to disable the authorization function for all one-stage dialing users.

By default, the authorization function is disabled for all one-stage dialing users.

This command is applicable to only one-stage dialing users, instead of two-stage dialing users. With this function enabled, called numbers will be sent to the RADIUS server for authorization after users who dial some access number to make IP calls pass authentication.

You must enable the authentication function before the authorization function.

Otherwise, the authorization-didcommand is unavailable.

Related command: authentication-did.