3Com MSR 30, MSR 50 manual Display ripng interface, View Any view

1312 CHAPTER 85: IPV6 RIPNG CONFIGURATION COMMANDS

display ripng interface

Syntax display ripng process-id interface [ interface-type interface-number ]

View Any view

Parameters process-id: RIPng process number, in the range of 1 to 65535. interface-typeinterface-number: Specified an interface.

Description Use the display ripng interface command to display the interface information of the RIPng process.

If no interface is specified, information about all interfaces of the RIPng process will be displayed.

Examples # Display the interface information of RIPng process 1.

<Sysname> display ripng 1 interface Interface-name: Ethernet1/0

Link Local Address: FE80::20F:E2FF:FE30:C16C

Split-horizon: on		Poison-reverse: off
MetricIn: 0		MetricOut: 1
Default route: off
Summary address:
	3:: 64
	3:: 16
Table 318 Description on the fields of the display ripng interface command
Field	Description
Interface-name	Name of an interface running RIPng.
Link Local Address	Link-local address of an interface running RIPng
Split-horizon	Indicates whether the split horizon function is enabled (on:
	Enabled off: Disabled).
Poison-reverse	Indicates whether the poison reverse function is enabled (on:
	Enabled off: Disabled).
MetricIn/MetricOut	Additional metric to incoming and outgoing routes
Default route	■ Only/Originate: Only means that the interface advertises only
	default route. Originate means that the default route and
	other RIPng routes are advertised.
	■ Off, indicates that no default route is advertised or the
	garbage-collect time expires after the default route
	advertisement was disabled.
	■ In garbage-collect status: With default route advertisement
	disabled, the interface advertises the default route with metric
	16 during the garbage-collect time.
Summary address	The summarized IPv6 prefix and the summary IPv6 prefix on the
	interface