3Com MSR 50 Timeslot-set, Timer ring ringback ringbusy time, Undo timeslot-set ts-set-number

	2675
timer ring
Syntax	timer ring { ringback ringbusy } time
	undo timer ring { ringback ringbusy }
View	R2 CAS view
Parameter	ringback time: Sets the duration in milliseconds of playing ringback tone, in the
	range of 1,000 to 90,000.
	ringbusy time: Sets the duration in milliseconds of playing busy tone, in the range
	of 1,000 to 90,000.
Description	Use the timer ring command to configure the duration of playing a signal tone
	when R2 signaling is adopted.
	Use the undo timer ring command to restore the default duration of playing a
	signal tone.
	By default, the duration of playing the ringback tone is 60,000 milliseconds and
	that of playing the busy tone is 30,000 milliseconds.
	This command applies to R2 signaling only.
Related command:	send-ringon page 2608.
Example	# Set the duration of playing the ringback tone to 10,000 milliseconds when R2
	signaling is adopted.
	<Sysname> system-view
	[Sysname] controller e1 1/0
	[Sysname-e1 1/0] timeslot-set 0 timeslot-list 1-31 signal r2
	[Sysname-e1 1/0] cas 0
	[Sysname-cas1/0:0] timer ring ringback 10000
timeslot-set
Syntax	timeslot-set ts-set-numbertimeslot-list timeslots-listsignal { e&m-delay
	e&m-immediate e&m-wink fxo-ground fxo-loop fxs-ground fxs-loop r2 }
	undo timeslot-set ts-set-number
View	E1/T1 interface view
Parameter	ts-set-number: TS group number. For an E1 interface, the TS group number ranges
	from 0 to 30, and for a T1 interface, the TS group number ranges from 0 to 23.