Operation of the Cooking Surface
Timer function
Setting/changing the cooking time
01. Select the desired cooking zone using the cooking zone selection but- tons and set the desired heat setting.
2.Press the “Timer“ button to activate the timer function for this cooking zone.
3.Using the + or - buttons, set or change the amount of time required until the cooking zone is to switch off automatically (e.g. 20 minutes). The timer starts after a few seconds and indicates the amount of time left.
The small “Timer Active“ indicator is also illuminated for the respective cooking zone, e.g. the upper left indicator corresponds to the rear left cooking zone.
At the end of the cooking time set, the cooking zone switches off auto- matically and an acoustic signal sounds.
4.Touch the TIMER button to switch off the signal and the indicator.
3For quicker adjustment, leave your finger on the + or - button until the desired value is reached.
If the - button is operated first, the time setting starts at 99 minutes. If the + button is operated, the time setting starts at 1 minute.
Use of the timer as an interval timer (egg timer)
01. Press the “Timer“ button to activate the timer function.
2.Using the + or - buttons, set the required cooking time (e.g. 20 minutes).
The timer starts after a few seconds and indicates the amount of time left.
When the time set is at an end, an acoustic signal sounds.
3.Touch the TIMER button to switch off the signal.
Displaying the remaining cooking time
0Select the desired cooking zone using the cooking zone buttons.
If the selected cooking zone is in timer mode, the remaining cooking time appears in the “Cooking Time“ display field.
18
