3Com MSR 50, MSR 30 manual Display ospfv3 peer statistic, Display ospfv3 request-list, 1289

1289

display ospfv3 peer statistic

Syntax display ospfv3 peer statistic

View Any view

Parameters None

Description Use the display ospfv3 peer statistic command to display information about all OSPFv3 neighbors on the router, that is, numbers of neighbors in different states.

Examples # Display information about all OSPFv3 neighbors.

<Sysname> display ospfv3 peer statistic

OSPFv3 Router with ID (1.1.1.1) (Process 1) Neighbor Statistics

----------------------------------------------------------------------

Area ID	Down	Init	2-way	ExStar	Exchange	Loading	Full
0.0.0.0	0	0	0	0	0	0	1
Total	0	0	0	0	0	0	1
Table 306 Description on the fields of the display ospfv3 peer statistic command
Field	Description
Area ID	Area ID
Down	In this state, neighbor initial state, the router has not received any
	information from a neighboring router for a period of time.
Init	In this state, the router received a Hello packet from the neighbor but the
	packet gives no ID of the router. Mutual communication is not available.
2-Way	Indicates mutual communication between the router and its neighbor is
	available. DR/BDR election is finished under this state (or higher).
ExStart	In this state, the router decides on the initial DD sequence number and
	master/slave relationship of the two parties.
Exchange	In this state, the router exchanges DD packets with the neighbor.
Loading	In this state, the router send LSRs to request the neighbor for needed LSAs.
Full	Indicates LSDB synchronization has been accomplished between neighbors.
Total	Total number of neighbors under the same state

display ospfv3 request-list

Syntax display ospfv3 [ process-id] request-list [ statistics ]

View Any view

Parameters process-id: OSPFv3 process ID, in the range 1 to 65535.

statistics: Statistics of link state request list.