3Com MSR 50, MSR 30 manual Source-ip, Syntax source-ip ip-address Undo source-ip, 2707

2707

By default, IP address is used.

Example # Set the domain name of the SIP device to hello.com.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] sip

[Sysname-voice-sip] sip-domain hello.com

source-ip

Syntax source-ip ip-address

undo source-ip

View SIP client view

Parameter ip-address: IPv4 address.

Description Use the source-ipcommand to configure the source IP address bound to the packets sent by the UA.

Use the undo source-ipcommand to remove the configuration.

By default, no source IP address is configured to be bound to the packets sent by the UA.

Note that the source IP address must be already assigned to a gateway interface.

You can use this command only when the SIP registration function is disabled.

Example # Specify 1.1.1.1 as the source IP address bound to the packets sent by the UA.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] sip

[Sysname-voice-sip] source-ip 1.1.1.1

user

Syntax user username password { cipher simple } password [ cnonce cnonce realm realm ] *

undo user

View SIP client view/POTS entity view

Parameter username: Username used for registration authentication, a string of 1 to 31 case-sensitive characters. The characters """ and "" are invalid.