TROUBLESHOOTING
Many operational problems have simple solutions. To save yourself time, check the following list before
calling for service.
Symptom | The IN USE LED does not turn on when you turn on the POWER SWITCH. |
Possible | Is the machine plugged in? |
cause | Is there power to the wall outlet? |
|
|
Symptom | The machine does not receive. |
Possible | Is the Slide Switch in the FAX position? |
cause | Also check to see if the handset is set properly in its cradle. |
Was receiving paper properly loaded? | |
| |
|
|
Symptom | When receiving manually, pressing the START control does not start reception. |
Possible | You hung up the telephone before pressing the START control. |
cause |
|
|
|
Symptom | The machine does not transmit or document was not received. |
Possible | Is IN USE LED blinking? |
cause | Did you load document face down? |
| Did you hang up the handset before IN USE LED started blinking? |
|
|
Symptom | Dirty copies received from remote unit. |
Possible | Dirty scan glass on sending machine. |
cause |
|
|
|
|
|
Symptom
Possible cause
The machine does not copy.
Did you load document face down?
Is the handset set properly in its cradle?
34
