COPYING A DOCUMENT
1.Make sure the unit is ON. If not, turn ON the Power Switch.
Note: The Document Feeder can accept only one page at a time.
2.Place the document FACE DOWN into the loading slot. The unit will grip the paper.
3.Set the Slide Switch to NORMAL.
4.If you want a higher quality copy, set the Slide Switch to FINE.
5.If copying a photograph, set the Slide Switch to PHOTO.
6.Press the START key, Your machine will begin to copy the original loaded in the document feeder.
7.After one page is copied, a
Your unit will return to the Standby mode, when the last page is copied.
Note: If document jamming occurs, the unit sounds a warning tone. (See page 31.)
Slide Switch