Audiovox AFX-1000 operation manual Receiving a FAX, Manual Phone Mode

RECEIVING A FAX

Manual Phone Mode

Use this mode if you want to receive document(s) after you have a voice conversation, or if you plan to use your unit as a telephone.

1.Make sure the unit is ON. If not, turn ON the POWER SWITCH.

2.Make sure that the Slide Switch is in the PHONE position.

3.You can answer the telephone as you normally would and use it for voice communications.

4.After you complete your voice conversation and the remote operator is ready, press the START key and hang up the telephone.

5.The calling machine then sends the document to your machine.

6.When the last document is received, the unit will return to the Standby mode.

_lY

Slide Switch

•FAX-Auto Fax/Tel Switching Mode

•Phone-Manual Phone Mode

Auto Fax/Tel Switching Mode

Use this mode to receive document(s) automatically when the machine is unattended or to have a voice conversation.

-To set Auto FAX/TEL Switching Mode:

1.Make sure the unit is ON. If not, turn on the Power Switch.

2.Set the Slide Switch to FAX position.

-Operation

When an incoming call (Ring) is made your unit automatically determines whether the call is from a FAX unit or a person:

•IF A FAX is being sent: Your unit receives document(s) automatically.

•IF it is a phone call: Your unit will ring for about 18 seconds. If you lift the handset during this period, you can begin a conversation. If you don’t lift the handset, your unit goes into auto fax receiving mode.

Note: If any communication error conditions occur, the unit sounds a warning tone.

14