Audiovox AFX-1000 Installation Instructions, AC Power Outlet Connection, Telephone Line System

INSTALLATION INSTRUCTIONS

This section gives instructions for connecting the transceiver to your telephone line and AC Power Outlet.

AC Power Outlet Connection

Use only the power cord supplied with your machine to connect the machine to an AC power outlet.

Connecting the Telephone Handset

Plug the end of the flexible cord on the handset into the TEL Jack on the facsimile machine.

Telephone Line System

If you are installing this unit in an electronic or digital telephone system or PBX, it may not operate correctly.

Consequently you may have to contact your local telephone company and have them install a separate line that bypasses this equipment.

Telephone Line Connections

Connection Method No. 1

This is the normal connection method. Use this method if you intend to use the handset Auto-Answer and Auto-Dial capabilities, as well as use the Handset for voice communications.

Plug one end of the TELEPHONE CORD into the STANDARD TELEPHONE CABLE CONNECTOR (WALL JACK) and the other end of the cable into the LINE connector on your facsimile machine.

TELEPHONE CORD	TELEPHONE CABLE
	CONNECTOR (LINE)
STANDARD TELEPHONE	ON YOUR MACHINE	TELEPHONE
I		HANDSET
CORD CONNECTOR

LINE TEL

Connection Method No. 2

Use this method if you have a multiline telephone. Connect the unit to one of the lines. This allows the FAX to Auto-Answer and Auto-Dial undisturbed on the attached line. You can use the remaining lines for voice communications. Use the facsimile unit HANDSET to talk to the remote operator if necessary. Note that this connection will require help from your local telephone company.

MULTI-LINE

TELEI HONE

TELEPHONE CABLE

CONNECTOR (LINE)

ON YOUR MACHINE

TELEPHONE LINE 1	I
		I
TELEPHONE LINE 2
TELEPHONE LINE 3

7