3Com MSR 30, MSR 50 manual Ca identifier, Syntax ca identifier name Undo ca identifier

2044 CHAPTER 134: PKI CONFIGURATION COMMANDS

By default, there is no restriction on the issuer name, the subject name and the alternative subject name of a certificate.

Note that the attribute of the alternative certificate subject name does not appear as a domain name, and therefore the dn keyword is not available for the attribute.

Example # Create a certificate attribute rule, specifying that the DN in the subject name includes the string of abc.

<Sysname> system-view

[Sysname] pki certificate attribute-group mygroup

[Sysname-pki-cert-attribute-group-mygroup] attribute 1 subject-name

dn ctn abc

#Create a certificate attribute rule, specifying that the FQDN in the issuer name cannot be the string of abc.

[Sysname-pki-cert-attribute-group-mygroup] attribute 2 issuer-name f

qdn nequ abc

#Create a certificate attribute rule, specifying that the IP address in the alternative subject name cannot be 10.0.0.1.

[Sysname-pki-cert-attribute-group-mygroup] attribute 3 alt-subject-n

ame ip nequ 10.0.0.1

ca identifier

Syntax ca identifier name

undo ca identifier

View PKI domain view

Parameter name: Identifier of the trusted CA, a case-insensitive string of 1 to 63 characters

Description Use the ca identifier command to specify the trusted CA, and bind the device with the CA name.

Use the undo ca identifier command to remove the configuration.

By default, no trusted CA is specified for a PKI domain.

Certificate request, retrieval, revocation, and query all depend on the trusted CA.

Example # Specify the trusted CA as new-ca.

<Sysname> system-view

[Sysname] pki domain 1

[Sysname-pki-domain-1] ca identifier new-ca