ARP SOURCE SUPPRESSION

48 CONFIGURATION COMMANDS

arp source-suppression enable

Syntax

arp source-suppression enable

 

undo arp source-suppression enable

View

System view

Parameter

None

Description

Use the arp source-suppression enable command to enable the ARP source

 

suppression function.

 

Use the undo arp source-suppression enable command to disable the

 

function.

 

By default, the ARP source suppression function is disabled.

Related command:

display arp source-suppression.

Example

# Enable the ARP source suppression function.

 

<Sysname> system-view

 

System View: return to User View with Ctrl+Z.

 

[Sysname] arp source-suppression enable

arp source-suppression limit

Syntax arp source-suppression limit limit-value

undo arp source-suppression limit

View System view

Parameter limit-value: Specifies the maximum number of packets with the same source IP address but unresolvable destination IP addresses that a port can receive in five seconds. It ranges from 2 to 1,024.

Page 699
Image 699
3Com MSR 50 ARP Source Suppression Configuration Commands, Arp source-suppression enable, Arp source-suppression limit