3Com MSR 50 manual Operating under the active user interface, # Lock the active user interface

2461

Parameter minutes: Specifies timeout time in minutes, in the range 0 to 35791, defaulting to 10 minutes.

seconds: Specifies timeout time in seconds, in the range 0 to 59, defaulting to 0 seconds.

Description Use the idle-timeoutcommand to set the idle-timeout timer. When it expires, the user connection is terminated.

Use the undo idle-timeoutcommand to restore the default.

The default idle-timeout is 10 minutes.

n The system automatically terminates user’s connection if there is no information interaction between the device and the user in timeout time.

Setting idle-timeout to zero disables the timer and the connection is maintained whether it is idle or not.

Example # Set the idle-timeout timer to 1 minute and 30 seconds.

<Sysname> system-view

[Sysname] user-interface console 0

[Sysname-ui-console0] idle-timeout 1 30

lock

Syntax	lock
View	User view
Parameter	None
Description	Use the lock command to set a password to prevent unauthorized users from
	operating under the active user interface.
	After entering the lock command, you are prompted to input a password (up to
	16 characters) and then confirm it by inputting the password again. The password
	is successfully set only when you input the exact password during the
	confirmation. After setting the password, you will be required to input the
	password next time you enter the system.
	By default, this function is disabled.
Example	# Lock the active user interface.
	<Sysname> lock
	Please input password<1 to 16> to lock current user terminal interface:
	Password:
	Again: