3Com MSR 50 Rip mib-binding, Rip output, Syntax rip mib-binding process-id Undo rip mib-binding

1177

Examples # Configure an additional metric of 12 for RIP routes sent on Ethernet1/0.

<Sysname> system-view

[Sysname] interface ethernet1/0

[Sysname-Ethernet1/0] rip metricout 12

rip mib-binding

Syntax rip mib-binding process-id

undo rip mib-binding

View System view

Parameters process-id: RIP process number, in the range of 1 to 65535.

Description Use the rip mib-bindingcommand to bind MIB operations with a specified RIP process.

Use the undo rip mib-bindingcommand to restore the default.

By default, MIB operations are bound to the RIP process with the smallest process

ID.

Examples # Configure RIP 100 to accept SNMP requests.

<Sysname> system-view

[Sysname] rip mib-binding 100

# Restore the default.

[Sysname] undo rip mib-binding

rip output

Syntax rip output

undo rip output

View Interface view

Parameters None

Description Use the rip output command to enable the interface to send RIP messages.

Use the undo rip output command to disable the interface from sending RIP messages.

Sending RIP messages is enabled on an interface by default.