3Com MSR 50, MSR 30 manual Peer ebgp-max-hop BGP/BGP-VPN instance view, 991

991

Use the undo peer description command to remove the description information of a peer/peer group.

By default, no description information is configured for a peer/peer group.

Create a peer/peer group before configuring a description for it.

Related commands: display bgp peer.

Examples # In BGP view, configure the description information of the peer group test as ISP1.

<Sysname> system-view [Sysname] bgp 100

[Sysname-bgp] peer test description ISP1

#In BGP-VPN instance view, configure the description information of the peer group test as ISP1(the VPN has been created).

<Sysname> system-view [Sysname] bgp 100

[Sysname-bgp] ipv4-family vpn-instance vpn1 [Sysname-bgp-vpn1] peer test description ISP1

peer ebgp-max-hop (BGP/BGP-VPN instance view)

Syntax peer { group-name ip-address } ebgp-max-hop[ hop-count ]

undo peer { group-name ip-address } ebgp-max-hop

View BGP view/BGP-VPN instance view

Parameters group-name: Name of a peer group, a string of 1 to 47 characters.

ip-address: IP address of a peer.

hop-count: Maximum hop count, in the range 1 to 255. The default is 64.

Description Use the peer ebgp-max-hopcommand to allow establishing an EBGP connection with a peer/peer group that is on an indirectly connected network.

Use the undo peer ebgp-max-hopcommand to restore the default.

By default, this feature is disabled.

You can use the argument hop-countto specify the maximum route count of the

EBGP connection.

Examples # In BGP view, allow establishing the EBGP connection with the peer group test that is on an indirectly connected network.