1385

c-bsr admin-scope

Syntax c-bsr admin-scope

undo c-bsr admin-scope

View Public instance PIM view, VPN instance PIM view

Parameter None

Description Use the c-bsradmin-scopecommand to enable BSR administrative scoping to implement RP-Set distribution based on BSR admin-scope regions.

Use the undo c-bsradmin-scopecommand to disable BSR administrative scoping.

By default, BSR administrative scoping is disabled, namely only one BSR exists in each PIM-SM domain.

Related command: c-bsr (PIM view), c-bsr group, and c-bsr global.

Example # Enable BSR administrative scoping in the public instance.

<Sysname> system-view

[Sysname] pim

[Sysname-pim] c-bsr admin-scope

c-bsr global

Syntax c-bsr global [ hash-length hash-lengthpriority priority ] *

undo c-bsr global

View Public instance PIM view, VPN instance PIM view

Parameter hash-length: Hash mask length for RP selection calculation in the global scope zone, in the range of 0 to 32. If you do not include this keyword in your command, the corresponding global setting will be used.

priority: Priority of the C-BSR in the global scope zone, in the range of 0 to 255. If you do not include this keyword in your command, the corresponding global setting will be used. A larger value of this argument means a higher priority.

Description Use the c-bsr global command to configure a C-BSR for the global scope zone.

Use the undo c-bsr global command to remove the C-BSR configuration for the global scope zone.

By default, no C-BSRs are configured for the global scope zone.

Page 1385
Image 1385
3Com MSR 50, MSR 30 manual Bsr admin-scope, Bsr global, Syntax c-bsr admin-scope Undo c-bsr admin-scope, 1385