3Com MSR 30, MSR 50 Fragment, Fr-class, Examples # Enable Frts on the serial interface Serial 1/0

1892 CHAPTER 125: FR QOS CONFIGURATION COMMANDS

Examples # Enable FRTS on the serial interface Serial 1/0.

<Sysname> system-view

[Sysname] interface Serial1/0

[Sysname-Serial1/0] fr traffic-shaping

fragment

Syntax fragment [ fragment-size ]

undo fragment [ fragment-size]

View Frame relay class view

Parameters fragment-size: Size of a fragment, in byte, ranging from 16 to 1600. By default, the fragment size is of 45 bytes.

Description Use the fragment command to enable the FRF.12-compliant fragmentation function on FR virtual circuit.

Use the undo fragment command to disable this function.

By default, the fragmentation function on FR virtual circuit is disabled.

Related commands: fr class.

Examples # Configure fragment size as 128 in the FR class named test1.

<Sysname> system-view

[Sysname] fr class test1

[Sysname-fr-class-test1] fragment 128

fr-class

Syntax fr-classclass-name

undo fr-class class-name

View Frame relay DLCI view/Frame relay interface view

Parameters class-name: Name of a FR class, a string of 1 to 30 characters.

Description Use the fr-classcommand to associate a FR class with the current FR virtual circuit or FR interface.

Use the undo fr-classcommand to remove the association between a FR class and the FR virtual circuit or FR interface.

By default, there is no association between a FR class and the FR virtual circuit or

FR interface.