3Com MSR 30, MSR 50 manual Configuration File Management Commands

2362 CHAPTER 156: CONFIGURATION FILE MANAGEMENT COMMANDS

Parameter by-linenum: Identifies each line of displayed information with a line number.

Description Use the display saved-configurationcommand to display the initial configuration file saved in the storage device.

In case the device malfunctions after being powered on, if you find some configurations are not validated or incorrect, you may use this command to identify the problem.

If you do not use the configuration file when the device starts up, meaning the displayed startup configuration file is NULL after you execute the display startup command, no information is displayed when you execute the display saved-configurationcommand; if you have saved the configuration file after the device starts up, the information last saved in the configuration file is displayed.

Related command: save, reset saved-configuration, and display current-configurationon page 2412.

Example # Display the configuration file saved in the storage device.

<Sysname> display saved-configuration

#

Version 5.20, Beta 1105

#

sysname Mydevice

#

local-user abc password simple abc

#

tcp window 8

#

interface Aux1/0 link-protocol ppp

#

interface Ethernet1/1

#

interface Ethernet1/2

#

interface Ethernet1/3

ip address 10.110.101.17 255.255.255.0

#

interface NULL0

#

ospf 1

#

ip route-static 10.12.0.0 255.255.0.0 Ethernet 1/0

#

user-interface con 0 user-interface aux 0 user-interface vty 0 4 authentication-mode none

#

return

The configurations are displayed in the order of global, port, and user interface.