NEC NWA-008869-001 manual Modes, Mode configuration, Mode Configuration

CHAPTER 3 BASICOPERATIONS AND VARIOUS EXPLANATIONS

MODES

MODES

Mode configuration

The In-Skin Router provides operation mode and config mode. Config mode is divided into the following three modes.

•	Operation mode
•	Config mode
	Global config mode	: Mode in which general setup can be performed
	Device config mode	: Mode in which each port can be set up for a specific physical operation

Interface config mode: Mode in which a physical port can be set up for a specific logical connection operation

Each command is associated with a specific mode, and can be entered only after the router enters that mode.

Mode Configuration

power ON

Self-

diagnosis

Login

authentication

User name Password

exit

Operation mode

Router #

enable - config

[ctrl] + [z]

	Config mode
		Interface config
			mode
interface xxxx
		Router (config-xxxx) #
	exit			interfacexxxx
		devicexxxx
Global config
mode
Router (config) #
	exit
		Device config
device xxxx			mode
		Router (config-xxxx) #

The characters "Router" preceding the prompt on the screen is the default setting. If you set a host name using the hostname command for router identification purposes, "Router" is replaced by this host name.

Indicates the transition assumed when no user is registered (for example, when the router is just shipped from the factory)

– 78 –	NWA-008869-001 Rev.1.0
	atch3001.fm