NEC NWA-008869-001 manual KEY Operations and Screen Displays, Moving the cursor

CHAPTER 3 BASICOPERATIONS AND VARIOUS EXPLANATIONS

KEY OPERATIONS AND SCREEN DISPLAYS

KEY OPERATIONS AND SCREEN DISPLAYS

During command entry, you can use the cursor movement, character deletion, command entry assist, and help functions.

Moving the cursor

On the command line, you can move the cursor to the right and left.

Ctrl	+	b , or	Moves the cursor one character to the left.
Ctrl	+	f , or	Moves the cursor one character to the right.
Ctrl	+ a		Moves the cursor to the beginning of the line.

Ctrl + e

Moves the cursor to the end of the line.

Router # enable − config Router # enable − config Router # enable − config Router # enable − config Router # enable − config

Ctrl + b , or (Move one character to the left) Ctrl + a (Move to the beginning of the line)

Ctrl + f , or (Move one character to the right) Ctrl + e (Move to the end of the line)

Editing characters on the command line

In combination with the cursor movement functions, you can use the following functions to edit (delete and replace) the desired characters on the command lines.

			Deletes the single character to the left of the cursor.
Back Space
			Deletes the single character at the cursor position.
Ctrl	+	d
			Replaces the character at the cursor position with the preceding one.
Ctrl	+	t
			Deletes all characters ranging from the cursor position to the end of the line.
Ctrl	+	k
			Deletes all characters on the command line.
Ctrl	+	c

– 73 –	NWA-008869-001 Rev.1.0
	atch3001.fm