NEC NWA-008869-001 manual System Conditions, Ethernet Connection, Digital Private Line Connection

CHAPTER 1 GENERAL INFORMATION

SYSTEM CONDITIONS

SYSTEM CONDITIONS

Ethernet Connection

For the LAN Ports of In-Skin Router, straight or cross cable (UTP or STP) is required. Prepare the cable according to the equipment to be connected with the In-Skin Router, such as HUB, ADSL modem or PC.

Digital Private Line Connection

PZ-M649 card is required for connection with the digital private line (T1).

PZ-M650 card is required for connection with the digital private line (E1).

Local Console Connection

In-Skin Router is equipped with a console port. By connecting the local console (such as PC) to the console port, you can perform basic setup of In-Skin Router from the local console.

As the connecting cable, the MAT cable (MAT CA-P/MAT CA-R/MAT CA-T) is required.

The local console requires a communication software conforming to VT-100. The communication soft- ware should be set as follows.

Item	Setting
Communication rate	9600 bps
Data length	8 bits
Parity	None
No. of stop bits	1 bit
Flow control	None

– 11 –	NWA-008869-001 Rev.1.0
	atch1001.fm