NEC NWA-008869-001 manual DIGITAL PRIVATE LINE NETWORK EXAMPLE T1

CHAPTER 5 EXAMPLES OF SETUP ON NETWORKS

DIGITAL PRIVATE LINE NETWORK EXAMPLE (T1)

DIGITAL PRIVATE LINE NETWORK EXAMPLE (T1)

This section explains an example of establishing an inter-LAN connection with a private line (T1), using the digital private line (T1) interface of the In-Skin Router (PZ-M649 is required).

In this example, networks A and B are connected together with a digital private line, using two In-Skin Routers. In the example shown in the figure, external CSUs are used. If the built-in CSUs of the In-Skin Routers are used, the same setup procedure can be used.

The setup includes the following operations:

•Setting the digital private line (T1)

•Setting an IP address to the serial interface

•Setting the route

•Setting DTI card

	Network A		Station
192.168.1.0/24				2000 IPS
				In-Skin Router
		192.168.1.1
				LC/
Terminal A				DLC
		LAN1		Card
192.168.1.2
						WAN (DS-1/DSX-1)
					DTI
					Card
				Router A

Station B

192.168.2.3

Station A

192.168.1.3

Station

2000 IPS

In-Skin Router

192.168.2.1
Terminal B
	LC/
192.168.2.2
	DLC
LAN1	Card

WAN (DS-1/DSX-1)

DTI

Card

Network B
192.168.2.0/24	Router B

CSU

CSU

T1 digital private line (carrier)

– 127 –	NWA-008869-001 Rev.1.0
	atch5001.fm