CHAPTER 6 MANAGEMENT AND MAINTENANCE

MANAGEMENT WITH SNMP

Setting the type of trap to be sent

By default, the In-Skin Router sends all traps. To prevent the In-Skin Router from sending a specific trap, use the no snmp-agent trap command.

In this example, the In-Skin Router is prohibited to send the “link-up” trap.

Router (config) # no snmp agent trap private snmp link up Enter

Router (config) #

Starting an SNMP agent

Start an SNMP agent.

Router (config) # snmp agent ip enable Enter

Router (config) #

Checking the settings

Use the show running-config command to check the settings.

Check also that MIB is obtainable from the SNMP manager and that traps have been sent normally.

Saving the settings

Use the write memory command to save the settings as startup config.

– 147 –

NWA-008869-001 Rev.1.0

 

atch6001.fm

Page 157
Image 157
NEC NWA-008869-001 Setting the type of trap to be sent, Starting an Snmp agent, Checking the settings, Saving the settings