DEFINITY AUDIX System Release 4.0
System Description Pocket Reference
Glossary
Command Mode
A system state in DEFINITY AUDIX system releases earlier than 4.0 where flashware is in control and software is shut down. In this state, a technician has access to menu options to see flashware status and ini- tialization history, run through flashware diagnostics, and to start or continue system initialization.
Configuration
The particular composition and hardware selected for a system, includ- ing internal options and peripheral equipment.
Control Link (CL)
The integration, or interface, between the DEFINITY AUDIX System and the switch that enables the transmission of control messages from the DEFINITY AUDIX System to the switch over a DCIU data link. The control messages are transmitted over a separate cable connection and carry information such as
Control Link Mode
The type of
D
Delivery Operations Support System (DOSS) Configurator
Lucent Technologies’ algorithmic system for configuring products for customers’ specific needs.
Digital Communications Protocol (DCP)
An Lucent Technologies proprietary protocol for networking remote communication systems.
DCP Mode 1
A Lucent Technologies proprietary Digital Communications Protocol (DCP) connection using a data rate of 56 Kbps for AUDIX Digital Net- working. DCP Mode 1 uses a DS1 facility on the switch or a dedicated facility on the switch or a dedicated facility on a T1 carrier.
DCP Mode 2
DCP Mode 2 is an asynchronous,
DCP Mode 3
A DCP connection using a data rate of 64 Kbps for AUDIX Digital Net- working. DCP Mode 3 uses a DS1 or ISDN facility on the switch or a dedicated facility on a T1 carrier.
Default
Issue 1 May 1999
A value that is automatically supplied if no other value is specified.
