Cable Connections | Lucent Technologies Release 4.0 specification

DEFINITY AUDIX System Release 4.0

System Description Pocket Reference 585-300-214

Customer Responsibilities

Cable Connections

Table B-2. Air Purity Requirements

Contaminant	Average concentration

Total particulate matter, including the following:	185.00 microgram/m3
Dust
Lint
Carbon particles
Paper fiber
Metal fragments

Nitrate in particulate matter	12.00 microgram/m3
Corrosive gases
Total hydrocarbons equivalent to methane	10.00 ppm
Sulphur dioxide	0.20 ppm
Oxides of nitrogen	0.30 ppm
Total oxidants equivalent to ozone	0.05 ppm
Hydrogen sulfide	0.10 ppm

Cable Connections

The customer is responsible for providing several connections from the customer’s facilities to the DEFINITY AUDIX system. These connections divide maintenance responsibilities between Lucent Technologies and the customer:

■All customers must provide a Cmentral Office (CO) line or a Direct

Inward Dialing (DID) line to connect the modem to an external telephone network for remote maintenance.1

■All customers must provide a power source for the external modem.1

■Customers using INTUITY Message Manager must provide a 10BaseT to connect the DEFINITY AUDIX system to the customer’s local area network (LAN).

Figure B-1 shows the connections customers must provide for the external modem.

Issue 1 May 1999

B-3

1.Customers outside the U.S. must provide an external modem.

Image 47

Lucent Technologies Release 4.0 manual Cable Connections, Table B-2. Air Purity Requirements

Contents

Definity Audix System Release Lucent Technologies Web Ordering Information Contents Customer Responsibilities Page Special Terminology About this BookIntended Audiences Supported Product Releases Viii How to Order Additional DocumentationHow to Comment on This Book Trademarks Feature Overview Features and CompatibilityFeature Overview Features for the Customer Organization Savings from a Smaller System Features for the SubscriberIssue Features and Compatibility Feature Overview Advantages of Intuity Message Manager Features for the System Administrator Compatibility SwitchesFeatures and Compatibility Non-native mode.5 Native and Non-native ModeCompatibility Considerations for the Defintiy Audix system Definity Audix System Release Switch Releases Compatible with the Definity Audix System Definity Audix System Release Definity Audix System Design and Operation Flashware TN568 Circuit PackHard Disk Drive Port Board Emulation Digital Networking SoftwareNetworking Amis Analog Networking High-speed Digital Networking Connections Maximum Voice Ports and Digital Networking Ports Cydxsl15 LJK DCP Mode 2 Connection Design and Operation MO Disk Drive MO Disk Drive Design and Operation Faceplate Faceplate Space Requirements On-board CablesOperating Requirements Sample Location in a SCC Design and Operation Operating Requirements Sample Location in a CMC Environmental Requirements Power RequirementsPhysical Dimensions for the Definity Audix System Power Requirements for the Definity Audix System Air Purity Requirements Atmospheric Requirements Definity Audix System Release Average System Requirements per Subscriber Capacity and SizingVoice Ports Voice Ports Port Capacities in Erlangs Capacity and Sizing Voice Ports Broadcast Messaging Features that Affect Voice PortsOutcalling Automated Attendant Capacity and Sizing Voice Storage Voice StorageVoice Storage for Announcement Sets Hard disk drive to store voice mail and announcements Intuity Message ManagerCapacity and Sizing Intuity Message Manager Limits for Intuity Message Manager Backup Limits on the MO Disk DriveBackup Limits on the MO Disk System Design Appendix a Transition NotesSystem Design Native and Non-native Support Voice Ports Administration Impacts Digital Networking Port Migration Impacts External Modem Alarm OriginationAdministration Impacts MO Disk Drive Alarm RelayLEDs Analog Port Emulation Switch IntegrationSwitch Integration DCS Networking Limited Availability for Control Link Integration Transition Notes Switch Integration Staff Appendix B Customer ResponsibilitiesStaff Environmental Requirements Table B-1. Atmospheric Requirements Environmental Requirements Table B-2. Air Purity Requirements Cable ConnectionsCable Connections Figure B-1. Cable Connections for the External Modem Customer Responsibilities Cable Connections Figure B-2. Lucent- and Customer-provided LAN Connections Definity Audix System Release AB-1 Abbreviations AB-2 AB-3 KbpsKHz AB-4 MHz AB-5 TTY Abbreviations AB-6 Glossary Boot or Reboot Audio Messaging Interchange Specification AmisAudix Administration and Data Acquisition Package Adap Backup Broadcast Messaging Boot FilesystemBusyout Service Class of Service COS Delivery Operations Support System Doss Configurator Command ModeConfiguration Control Link Mode Errors Digital-Port DP ModeDigital Signal Processor DSP Disconnect Signaling Detection Flash programmable read-only memory Fprom Guest PasswordField Filesystems Initialization Initialization and Administration System InadsHeader Hunt Group Magneto-optical MO Disk Drive Local Maintenance Terminal LMTLogin Local Area Network LAN Operations, Administration, and Maintenance OA&M Native ModeNon-native Mode Nonvolatile Random Access Memory Nvram Reply Loop Escape RebootRemote Field Update Protocol Subscriber Specific Announcement Set UpdateUpgrade Standalone Utility GL-12 Voice Port IN-1 Index IN-2 IN-3 13, B-1 to B-3 power, 2-12 space, 2-9 to Index IN-4