3Com MSR 30, MSR 50 manual Type

2286 CHAPTER 149: NQA CLIENT CONFIGURATION COMMANDS

By default, the maximum number of hops that a probe packet can traverse in a network is 20.

Note that after you configure the routeopt bypass-routecommand, the maximum number of hops a probe packet traverses in the network is 1.

Example # Configure the maximum number of hops that a probe request can traverse in a network as 16.

<Sysname> system-view [Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] ttl 16

type

Syntax	type { dhcp dlsw ftp http icmp-echo snmp tcp udp-echo udp-jitter }
View	NQA test group view
Parameter	dhcp: DHCP test.
	dlsw: DLSw test.
	ftp: FTP test.
	http: HTTP test.
	icmp-echo: ICMP-echo test.
	snmp: SNMP test.
	tcp: TCP test.
	udp-echo: UDP-echo test.
	udp-jitter: UDP-jitter test.
Description	Use the type command to configure the test type of the current test group and
	enter test type view.
	By default, no test type is configured.
Example	# Configure the test type of a test group as FTP.
	<Sysname> system-view
	[Sysname] nqa entry admin test
	[Sysname-nqa-admin-test] type ftp
	[Sysname-nqa-admin-test-ftp]