3Com MSR 30, MSR 50 manual Mpls rsvp-te graceful-restart, Mpls rsvp-te hello

1608 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS

Upon expiration of the blockade timeout time, the blockade state on the node is removed.

Before you can configure this command, enable RSVP-TE.

Related command: mpls rsvp-te timer refresh.

Example # Set the blockade multiplier to five.

<Sysname> system-view [Sysname] mpls

[Sysname-mpls] mpls rsvp-te blockade-multiplier 5

mpls rsvp-te graceful-restart

Syntax mpls rsvp-te graceful-restart

undo mpls rsvp-te graceful-restart

View MPLS view

Parameters None

Description Use the mpls rsvp-tegraceful-restartcommand to enable the GR capability for MPLS RSVP-TE.

Use the undo mpls rsvp-te graceful-restart command to disable MPLS

RSVP-TE GR.

By default, GR capability is disabled for MPLS RSVP-TE.

Note that you need to enable RSVP-TE hello extension before enabling RSVP-TE

GR.

Examples # Enable MPLS RSVP-TE GR.

<Sysname> system-view [Sysname] mpls lsr-id 1.1.1.1

[Sysname] mpls [Sysname-mpls] mpls te

[Sysname-mpls] mpls rsvp-te

[Sysname-mpls] mpls rsvp-te hello

[Sysname-mpls] mpls rsvp-te graceful-restart

mpls rsvp-te hello

Syntax mpls rsvp-te hello

undo mpls rsvp-te hello