3Com MSR 50 manual Display x25 vc, Related command x25 switch svc, Syntax display x25 vc lci, 429

429

Parameter dynamic: Displays VC switching table. static: Displays SVC switching table.

Description Use the display x25 switch-table svc command to display SVC switching table.

With the keyword static included, the manually configured SVC switching table is displayed.

With the keyword dynamic included, the VC switching table is displayed. VC routing table is the link relationship between the node port number and the logic channel number of the VC. VC routing table changes with calls: it is generated as a call is established and it is cleared as the call is over.

Related command: x25 switch svc.

Example # Display X.25 SVC static switching table.

<Sysname> display x25 switch-table svc static
Number	Destination Substitute-src Substitute-dst CUD			SwitchTo(type/name)
1	11			I/Serial2/0
2	22			I/Serial2/1/0
3	131			H/hg1
4	132			T/123.123.123.123
5	133			T/123.123.123.123
6	111	222	333	T/4.4.4.4
Total of static svc is 6.
The item type of SwitchTo meaning:
I: interface		H: hunt-group	T: xot
Table 61 Description on the fields of the display x25 switch-table svc command
Field		Description
Number		Route sequence number in the switching table
Destination		Destination X.121 address
Substitute-src		X.121 source address after substitution; if the content is blank, it
		means no substitution.
Substitute-dst		X.121 destination address after substitution; if the content is blank, it
		means no substitution.
CUD		Call User Data
SwitchTo		Forwarding address of this route, which can be an interface, XOT
		channel or hunt group

display x25 vc

Syntax display x25 vc [ lci ]

View Any view

Parameter lci: Logical channel identifier in the range 1 to 4095. If not specified, all VCs will be displayed.

Description Use the display x25 vc command to display X.25 virtual circuit information.