1218 CHAPTER 81: STATIC ROUTING CONFIGURATION COMMANDS

 

undo ip route-staticvpn-instances-vpn-instance-name&<1-6>dest-address { mask

 

mask-length } [ gateway-address [ public ] interface-type interface-number

 

[ gateway-address ] vpn-instanced-vpn-instance-name gateway-address ]

 

[ preference preference-value ]

View

System view

Parameters

vpn-instances-vpn-instance-name&<1-6>: Specifies the VPN instance name,

 

which is a string of 1 to 31 case-sensitive characters. &<1-6> indicates the

 

argument before it can be entered up to 6 times. Each VPN instance has its own

 

routing table, and the configured static route is installed in the routing tables of

 

the specified VPN instances.

 

dest-address: Destination IP address of the static route, in dotted decimal notation.

 

mask: Mast of the IP address, in dotted decimal notation.

 

mask-length: Mask length, in the range 0 to 32.

 

gateway-address: IP address of the next hop, in dotted decimal notation.

 

interface-typeinterface-number: Specifies the output interface by its type and

 

number. If the output interface is a broadcast interface, such as an Ethernet

 

interface, a virtual template or a VLAN interface, the next hop address must be

 

specified.

 

vpn-instanced-vpn-instance-name: Name of the destination VPN instance,

 

case-sensitive. If a destination VPN instance name is specified, the router will

 

search the output interface in the destination VPN instance based on the

 

configured gateway-address.

 

gateway-addresspublic: Indicates that the specified gateway-addressis a public

 

network address, rather than a VPN instance address.

 

preference preference-value : Specifies the preference of the static route, which is

 

in the range of 1 to 255 and defaults to 60.

 

tag tag-value: Sets a tag value for the static route. Tags of routes are used in

 

routing policies to control routing. For information about routing policy, refer to

 

“Routing Policy Common Configuration Commands” on page 1187.

 

description description-text: Configures a description for the static route, which

 

consists of 1 to 60 characters, including special characters like space, but

 

excluding “?”.

 

track track-entry-number: Associates the static route with a track entry. Use the

 

track-entry-numberargument to specify a track entry number, in the range 1 to

 

1024. Support for this argument varies with devices.

Description

Use the ip route-staticcommand to configure a unicast static route.

 

Use the undo ip route-staticcommand to delete a unicast static route.

Page 1218
Image 1218
3Com MSR 30, MSR 50 manual Configured gateway-address