427

Example # Display the X.25 address mapping table.

<Sysname> display x25 map Interface:Serial3/0(protocol status is up): ip address:202.38.162.2 X.121 address: 22

map-type: SVC_MAP VC-number: 0 Facility:

ACCEPT_REVERSE;

BROADCAST;

PACKET_SIZE: I 512 O 512

Table 58 Description on the fields of the display x25 map command

Field

Description

 

 

Interface:Serial3/0(protocol status is up)

Interface name and protocol status

ip address:202.38.162.2 X.121 address: 22

IP address and X.121 address of the

 

interface

map-type: SVC_MAP

Mapping type

VC-number: 0

VC number

Facility:

User facility of the interface

 

 

display x25 pad

Syntax display x25 pad [ pad-id]

View Any view

Parameter pad-id: X.25 PAD connection (packet assembly/disassembly facility). The ID is in the range 0 to 255.

Description Use the display x25 pad command to display X.25 PAD connection information.

If no pad ID is specified, all PAD connection information will be displayed.

Example # Display all X.25 PAD connection information.

<Sysname> display x25 pad UI-INDEX130:

From remote 22 connected to local 11, State: Normal X.3Parameters(In): 1:1,2:0,3:2,4:1,5:0,6:0,7:21,8:0,9:0,10:0,11:14

12:0,13:0,14:0,15:0,16:127,17:21,18:18,19:0,20:0,21:0,22:0

X.3Parameters(Out):

1:1,2:0,3:2,4:1,5:0,6:0,7:21,8:0,9:0,10:0,11:14

12:0,13:0,14:0,15:0,16:127,17:21,18:18,19:0,20:0,21:0,22:0

Input:

Pkts(total/control): 13/2 bytes:12 queue(size/max) :0/200

Output:

Pkts(total/control): 15/2 bytes:320

Page 427
Image 427
3Com MSR 50, MSR 30 Display x25 pad, Example # Display the X.25 address mapping table, Syntax display x25 pad pad-id, 427