3Com MSR 30, MSR 50 manual Igp

1588 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS

ip-address: IP address of an interface.

network-lsa: Displays traffic engineering database (TEDB) information in network LSAs.

node: Displays the TEDB information on nodes. If no node is specified, the TEDB information on all nodes is displayed.

mpls-lsr-id: Specifies a node by its MPLS LSR ID.

: Filters output by regular expression.

begin: Displays information beginning with a defined regular expression.

include: Displays information that includes a defined regular expression.

exclude: Displays information that excludes a defined regular expression.

regular-expression: Regular expression, a string of 1 to 80 characters without spaces.

Description Use the display mpls te cspf tedb command to display information about CSPF-based TEDB by specified criteria.

Example # Display TEDB information in network LSAs.

<Sysname> display mpls te cspf tedb network-lsa
Maximum Network LSA		Supported: 500
Current Total Network LSA Number:			7
Id	DR MPLS LSR-Id	DR-Address	IGP	Process-Id	Area	Neighbor
1	8.1.1.2	3.0.0.2	OSPF	100	0	1.1.1.1
						2.1.1.1
						8.1.1.2
2	2.1.1.1	3.0.0.3	OSPF	100	0	2.1.1.1
						3.1.1.1
						2.1.1.2
3	3.1.1.2	3.0.0.4	OSPF	100	0	3.1.1.1
						4.1.1.1
						3.1.1.2
4	4.1.1.2	3.0.0.5	OSPF	100	0	4.1.1.1
						5.1.1.1
						4.1.1.2
5	5.1.1.2	3.0.0.6	OSPF	100	0	5.1.1.1
						6.1.1.1
						5.1.1.2
6	6.1.1.2	3.0.0.9	OSPF	100	0	6.1.1.1
						7.1.1.1
						6.1.1.2
7	7.1.1.1	12.0.0.7	OSPF	100	0	3.1.1.1
						7.1.1.1
						7.1.1.2

Table 406 Description on the fields of the display mpls te cspf tedb command

Field	Description
ID	Number
DR MPLS LSR-Id	MPLS LSR ID of the designated router (DR)
DR-Address	Interface address of the DR
IGP	Interior gateway protocol: OSPF or IS-IS