TRAVEL ALARM CLOCK
WITH 
BACKLIGHT
AND NIGHT FINDER
Model AS-316NE
A)
B)
FIG. 1
C)
D)
FIG. 2
E)
F)
FIG. 3
FIG. 4
ENGLISH
INSTRUCTION MANUAL
FEATURES
-Unique Night FinderTM feature to locate the clock in the dark.
-View the current time and alarm time simultaneously.
-
-Five minute snooze function activates with unique Lite Touch feature.
-Bright blue HiGloTM backlight illuminates the display for easy
-Protective hinged covers keeps buttons from resetting in transit and also acts as a
DESCRIPTION OF PARTS
A.Night Finder indicator
B.Alarm ON/OFF indicator
C.Down button
D.ALARM ON/OFF switch
E.TIME SET/LOCK/ALARM SET switch
F.Up button
A)12 hour display
B)24 hour display [ SEE FIG. 1 ]
INSTALLING AND REPLACING BATTERY
The unit uses one AAA Alkaline battery.
If the display becomes dim, removes the exhausted battery and follow these steps to replace it:
1.Slide the battery door in the direction of the arrow.
2.Insert the AAA battery as indicated by the polarity symbols (+ and
3.Replace the battery compartment door.
TABLE STANDING
To use the cover as a stand, rotate the hinged cover over the back of the clock.
[ SEE FIG. 5 ]
HOW TO SET THE CLOCK TIME
1.Lift the cover to reveal the setting buttons.
2.Slide the [TIME SET/LOCK/ALARM SET] switch to the TIME SET position. The time on the top of display flashes [SEE FIG.2]:
C)12 hour display
D)24 hour display
3.Press the [UP] or [DOWN] arrow button to increase/decrease the setting in one minute increments until the desired hour and minute are displayed. Press and hold the [UP] or [DOWN] button for faster setting.
4.When the correct time is displayed, slide the [TIME SET/LOCK/ALARM SET] switch to the LOCK position. The time display stops flashing and the time is set.
HOW TO SET THE ALARM TIME
1.Slide the [TIME SET/LOCK/ALARM SET] switch to the ALARM SET position. The alarm time on the bottom of the display flashes
[SEE FIG.3]:
E)12 hour display
F)24 hour display
2.Press the [UP] or [DOWN] arrow button to increase/decrease the setting in one minute increments until the desired hour and minute are displayed. Press and hold the [UP] or [DOWN] button for faster setting.
3.Slide the [TIME SET/LOCK/ALARM SET] switch to the LOCK position. The alarm time display stops flashing and the alarm time is set.
IMPORTANT: After your alarm time has been set, you MUST slide the [ALARM ON/OFF] switch to the ON position to activate the alarm.
LITE TOUCH HIGLOTM BACKLIGHT
Using the Lite Touch feature, the display will activate for three seconds so you can see the display in the dark. The light then automatically turns off.
[ SEE FIG. 4 ]
UNIQUE NIGHTFINDERTM FUNCTION
Press the [NIGHT FINDER] button once and appears on the display. The display backlight flashes every few seconds.
Note: The NightfinderTM feature is intended for use in a very dark environment. You may not be able to see the flashing display under normal light conditions.
G.NIGHT FINDER button
H.Buzzer
I.Battery cover
[ SEE FIG. 6 & FIG.7 ]
IMPORTANT: The NightfinderTM should only be used in an unfamiliar enviroment, such as hotel room, so as not to drain the battery. Under constant use conditions, the battery life will be reduced significantly.
THE RESET FUNCTION
If your clock doesn’t operate properly, take out the battery. Wait for 30 seconds and then insert it back into the battery compartment to reset your clock display. You will then need to set the clock and alarm times again.
MAINTENANCE
When handled properly, this unit is engineered to give you years of satisfactory service. Here are a few product care instructions:
1.Do not immerse the unit in water. If the unit comes in contact with water, dry it immediately with a soft
2.Do not clean the unit with abrasive or corrosive materials. Abrasive cleaning agents may scratch the plastic parts and corrode the electronic circuit.
3.Do not subject the unit to excessive: force, shock, dust, temperature, or humidity. Such treatment may result in malfunction, a shorter electronic life span, damaged batteries, or distorted parts.
4.Do not tamper with the unit’s internal components. Doing so will terminate the unit’s warranty and may cause damage. The unit contains no user- serviceable parts.
5.Only use new batteries as specified in this instruction manual. Do not mix new and old batteries as the old batteries may leak.
6.Read this instruction manual thoroughly before operating the unit.
SPECIFICATIONS
Operation | : 0°C to 50°C (32°F to 122°F) temperature |
Accuracy | : +/- 0.5 seconds per day |
Power Source | : One pc. |
| (Alkaline battery required) |
Dimension | : 82 x 64 x 15 mm / 3.23" x 2.52" x 0.6" |
| (H x W x D) |
Weight | : 45 g / 1.6 oz. (without battery) |
CAUTION
-The content of this manual is subject to change without further notice.
-Due to printing limitation, the displays shown in this manual may differ from the actual display.
-The contents of this manual may not be reproduced without the permission of the manufacturer.
Company Name: Oregon Scientific, Inc.
Address: 19861 SW 95th Place, Tualatin, Oregon 97062, USA
Website address: www.oregonscientific.com
CUSTOMER ASSISTANCE
Should you require assistance regarding this product and its operation, please contact our customer care department at
FIG. 5
FIG. 6
ABOUT THE ALARM
1.Slide the [ALARM ON/OFF] switch to the ON position. An alarm ON/OFF indicator is displayed on the LCD display. Now the alarm will sound at the programmed time.
2.The alarm wakes you gently with a series of beeps that gradually increase in volume.
3.To silence the alarm slide the [ALARM ON/OFF] switch to the OFF position. The alarm indicator disappears from the display and the alarm is deactivated.
Note :
Remember, you must slide the [ALARM ON/OFF] switch to the ON position to use again. However, for your convenience, the alarm will automatically shut off after one minute and will sound again at the same time the next day.
HOW TO USE THE SNOOZE
The Lite Touch feature enables you to activate the five minute snooze by gently rocking the alarm clock backwards on its stand with the touch of your fingers.
[ SEE FIG. 4 ]
WARRANTY
This product is warranted to be free of manufacturing defects for a period of 3 months from date of retail purchase. Defective product should be directed to the place of retail purchase for exchange. Should this not be possible, contact our customer care department for assistance and a return material authorization. No returns may be made without a return authorization. Please retain your retail receipt as you may be asked to provide a copy of it for proof of date purchased.
This warranty does not cover product subjected to abuse, misuse, accidental damage or tampering.
FIG. 7
