Technical Specifications, OPERATING INSTRUCTIONS cont, Power

OPERATING INSTRUCTIONS cont.

GETTING TO KNOW YOUR BAGLESS WATER

FILTRATION VACUUM

Emptying & Cleaning Water Tank WARNING: To reduce risk of electric

shock - unplug before cleaning or emptying water tank.

WARNING: Water level MUST NEVER exceed the "Max" level indicated on the water tank. Empty tank when water level reaches "MAX" indicator. If water is seen to be coming from the exhaust - immediately turn the unit off and unplug from electrical outlet. Empty water tank and clean. Refill water tank with clean water to the "MIN" level, then plug unit back in and continue working.

1.Unplug unit from electrical wall outlet.

2.Remove the water tank and empty into a toilet or an outside drain.

3.The foam inlet filter should be cleaned regularly depending on amount of usage. A severely soiled or clogged filter should be thoroughly washed with fresh tepid water. A mild detergent may be used if required.

4.Let the filter air dry completely before replacing in vacuum. Do not use a washing machine to rinse the filter. Do not use a hair dryer to dry it. Air dry only. Never operate the vacuum without the filter in place.

5.Exhaust filter should be inspected each time the water tank is emptied. To clean the exhaust filter follow the same procedure as for the foam inlet filter.

6.The water tank should also be thoroughly washed. A mild detergent may be used if required.

DO NOT IMMERSE THE ELECTRICAL PART OF THE VACUUM INTO WATER OR ANY OTHER LIQUID.

7.Store your vacuum in a cool, dry place.

Please Note: The foam inlet filter and the exhaust filter are washable. It is recommended however, that they should be replaced every three (3) months or sooner depending on the amount of usage.

Using the Floor to Carpet Attachment

The brushes under the floor to Carpet Nozzle (A) can be left in “Out” position for use on carpets or can be lifted to “Up” position for vacuuming floors. (Fig. 3)

Fig. 3

Motor Thermostat

Important: This vacuum cleaner is equipped with a motor protective thermostat. If for some reason your vacuum overheats, the thermostat will automatically turn the unit off. Should this occur, unplug the vacuum from the wall outlet and turn off the switch. Allow the unit to cool for a minimum of 45 minimum prior to restarting the unit. To restart, re- plug the vacuum into the wall socket and turn the switch back on.

Cord Storage

A convenient cord storage area is provided on the top cover. Simply spool the cord in either direction under the top cover and tuck the plug under the lip.

14	11


1.	Handle	8.	Upholstery Brush
2.	On/Off Power Switch	9.	Crevice Tool
3.	Speed Control	10.		Small Round Brush
4.	Flexible Hose	11.		Floor to Carpet Brush
5.	Water Tank	12.		Wet Use Brush
6.	Base	13.		Extension Tube (3pcs)
7.	Triangular Brush	14 Deluxe Air Driven Turbo Brush
		15.		Compact Air Driven Turbo Brush