3Com MSR 50 manual Voice Radius Configuration Commands, Aaa-client, Accounting, Syntax aaa-client

VOICE RADIUS CONFIGURATION

180 COMMANDS

aaa-client

Syntax aaa-client

View Voice view

Parameter None

Description Use the aaa-clientcommand to enter voice AAA client view.

Example # Enter voice AAA client view.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] aaa-client

[Sysname-voice-aaa]

accounting

Syntax accounting

undo accounting

View Access number view

Parameter None

Description Use the accounting command to enable the RADIUS accounting function for users who dial some access number.

Use the undo accounting command to disable the RADIUS accounting function.

By default, the RADIUS accounting function is disabled for users who dial access numbers.

On one voice gateway, the RADIUS accounting function for one-stage dialing users (who dial a called number to originate a call after picking up the phone) differs from that for two-stage dialing users (who first dial an access number and then a called number to originate a call after picking up the phone). This command is only applicable to an access number, namely, two-stage dialing users.