Paradyne 3800 manual Default Configuration Options G, Async Dial and UNIX, Sync Dial, Sync Leased

Default Configuration Options G

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-1

Overview

Table G-1 in this appendix lists all default configuration options for the four factory preset configurations. An N/A indicates that the value for this configuration option does not appear on the LCD if that factory default configuration is selected.

Table G-1

(1 of 4)

Factory Default Configuration Options

Configuration Option	Async Dial and UNIX	Sync Dial	Sync Leased
			Answer/Originate Mode
	Dial Default Settings	Default Settings
			Default Settings
DTE Interface
Async/Sync Mode	Async	Sync	Sync
Async DTE Rate	19,200 bps	N/A	N/A
# Data Bits	8	N/A	7
Parity Bit	None	N/A	Odd
# Stop Bits	1	N/A	N/A
DTR Action	Ignore	Standard RS232	Ignore
DSR Control	Forced ON	Standard RS232	Standard RS232
RTS Action	Ignore	Standard RS232	Standard RS232
CTS Control	Forced On	Standard RS232	Standard RS232
Wink When Disc	RTS/CTS Delay	0 msec	0 msec
LSD Control	Standard RS232	Standard RS232	Standard RS232
	Wink When Disc*
TX Clock Source	N/A	Internal	Internal
CT111 Rate Control	Disable	Disable	Disable

* UNIX Dial default setting only.

3810-A2-GB30-30 September 1998 G-1