Manuals / Paradyne / Computer Equipment / Network Card

Paradyne 3800 Warning Download ReprogramRemote, RemClone Status Establish Remote, Access, Invalid

Models: 3800

1 213

Download 213 pages 48.38 Kb

Page 120

Warning : Download

Control Branch

At this point, if you do not want to continue this process, abort the transfer by selecting any function key. This returns the modem to the Top-Level menu.

However, to continue with the transfer, press the key to display the Reprogram_Remote selection.

Warning : Download

Reprogram_Remote

F1 F2 F3

Press any function key to begin the transfer.

RemClone Status

Establish Remote

F1 F2 F3

The local modem’s LCD displays Establish Remote, indicating the modem is attempting to establish a Remote Cloning Download session with the remote modem.

If unsuccessful, the modem remains in the Download Transfer mode. The LCD’s top line displays RemClone Failed and the bottom line displays one of the following messages:

Incompat The modems are connected,

Modulat but are using a modulation scheme other than V.33, V.32bis, V.32, or V.29.

No Response The remote modem is not a 3800 Series modem or the connection between the two modems is poor.

Access	The remote modem’s Access
Disabled	from Remote configuration is
	disabled. Also is displayed if
	the local modem has a
	firmware release prior to
	Release 3.0 and the remote
	modem has Release 3.0 or
	greater installed with either
	Answer Access Security or
	Originate Access Security
	enabled. In this case, both
	security methods must be
	disabled in the remote modem
	to achieve the download.
Password	The local and remote
Invalid	modems’ passwords do not
	match.

Correct the problem and attempt another download from the local modem. If this fails, contact your service representative.

After successful establishment of a Remote Cloning Download session, the following screens are displayed.

RemClone Status

Initializing

F1 F2 F3

RemClone Status

Bank 1 : xxxx/yyyy

F1 F2 F3

3810-A2-GB30-30

September 1998

10-5

Image 120

Paradyne 3800 Warning Download ReprogramRemote, RemClone Status Establish Remote, RemClone Status Initializing, Access

Contents

COMSPHERE 3800 SERIES MODEMS MODELS 3810, 3811, AND USER’S GUIDEDocument No. 3810-A2-GB30-30 COMSPHERE 3800 SERIES MODEMS MODELS 3810, 3811, AND USER’S GUIDEDocument No. 3810-A2-GB30-30 SeptemberCOMSPHERE 3800 Series Modems Models 3810, 3811, and COPYRIGHT E 1998 Paradyne Corporation. All rights reservedWarranty, Sales, and Service Information Document FeedbackImportant Safety Instructions Notices The following warning applies to all Model 3811 modemsCOMSPHERE 3800 Series Modems Notice to Users of the Public Switched Telephone Network Government Requirements and Equipment ReturnUnited States Notice to Users of the Canadian Public Switched Telephone Network CanadaPage COMSPHERE 3800 Series Modems September3810-A2-GB30-30 Table of Contents 2. Model 3810 and 3820 Installation3. Model 3811 Installation PrefaceCall Setup Branch Configure BranchDCP Operation 6. Talk/Data Branch14. AT Command Set and S-Registers 12. Security13. Fax Operation AppendicesList of Figures PageList of Tables TablesPage COMSPHERE 3800 Series Modems September3810-A2-GB30-30 How to Use This Manual PrefaceObjectives and Reader Assumptions Chapter 7 - Status Chapter 8 - TestCarrier, Installation Manual Installation InstructionsSelect Service & Support → Technical Manuals Related DocumentsIntroduction OverviewFeatures OptionsCOMSPHERE 3800 Series Models Model 3810 and 3820 Installation Overview3800 Series Modem Package Figure 2-1. Model 3810 andModel 3810 or Model 3820 Modem Installation Customer-Supplied Equipment6700 Series Network Management System User’s Guide Model 3810 4-Wire/2-Wire Leased-Line Connection Model 3810 Dial-Line ConnectionFigure 2-2. Model 3810 Rear Panel Model 3820 2-Wire Leased-Line Connection Model 3820 Dial-Line ConnectionFigure 2-3. Model 3820 Rear Panel DTE Connection AC Power Transformer Connection Modem Power-UpPower On Selftst Passed Model 3810 and Model 3820 Telephone ConnectionRemoving and Replacing Model 3810 and Model 3820 Modems Model 3811 Installation OverviewModel 3811 Installation Figure 3-1. ModelFigure 3-2. Installing a Model 3811 Modem Model 3811 InstallationRemoving and Replacing Model 3811 Modems Figure 3-3. Circuit Pack LockDiagnostic Control Panels Models 3810 and Diagnostic Control PanelsDCP Operation OverviewFigure 4-1. Model 3810 DCP Figure 4-2. Model 3820 DCPCOMSPHERE 3800 Series Modems SeptemberModel 3811 Faceplate and Shared Diagnostic Control Panel Figure 4-3. Optional SDCP, Model 3811 Faceplate, and Optional SDUStatus Indicators Model 3810 and Model 3811 DCP LEDsLabel ColorModel 3820 DCP LEDs SDCP LEDsLabel ColorDiagnostic Control Panel Operation Hidden Choice IndicatorsRight Scroll Indicator Left/Right Scroll IndicatorMenu Structure and KeysSelect Key Model 3811 only Call SetupAlarm Status Setup MessagesTop-Level Menu Status and Operational Messages 1 of2 of MessagesCall Disconnect Top-Level Menu StatusDial Backup AT CommandReset Message 3 ofCommon Operational Messages CommonIndicates MessagesDial Access Security Messages Dial AccessSecurity IndicatesSelecting Factory Configuration Options Using the Diagnostic Control Panel DCPUsing AT Commands TYPE AT TYPE AT&Fy&WnDiagnostic Control Panel Security Access Frnt Panl Acces Grant DenyCOMSPHERE 3800 Series Modems September4-16 3810-A2-GB30-30Call Setup Branch CallSetupOverview Call Setup Branch AT Command EquivalentDial Disconnect AnswerAT Command Equivalent AT Command EquivalentFigure 5-1. Dial Backup Dial Standby/Return to DialChange Directory AT Command EquivalentValid Dial Command Modifiers 01 9W5556789 zAT Command Equivalent Talk/Data Branch Talk/Data BranchOverview Manual Dialing when the Remote Modem Is Configured for Auto-Answer Manual Dialing when the Remote Modem Is Configured for Manual AnswerPlacing Modems into Talk Mode Once Modems Are Online Status Branch OverviewOverview Status Branch VF Identity DTE RS366A Options Record Status Branch Excellent, Good, Fair, Poor, orAT Command Equivalent Identity AT Command EquivalentSer # Mod #RS366A Status Identity DTELSD DTR DSR Tst RS366AOptions RecordAT Command Equivalent COMSPHERE 3800 Series Modems September3810-A2-GB30-30 Test Branch OverviewTest Test Branch AbortSelf AT Command EquivalentLoc Analog Loop Figure 8-1. Local Analog LoopbackAT Command Equivalent Rem Digital Loop Figure 8-2. Remote Digital LoopbackAT Command Equivalent Loc Digital Loop Figure 8-3. Local Digital LoopbackAT Command Equivalent Pattern Figure 8-4. Pattern Test and Local Analog Loopback TestFigure 8-5. Pattern Test and Remote Digital Loopback Test Figure 8-6. End-to-End Pattern Test AT Command EquivalentCOMSPHERE 3800 Series Modems September3810-A2-GB30-30 Configure Branch OverviewFigure 9-1. DCP Configuration Process COMSPHERE 3800 Series ModemsSeptember Active Operating Active Saved Customer 1 Customer 2 FactoryFigure 9-2. AT Command Configuration Process Configure BranchConfigure Branch ConfigureEditing and Saving a Configuration Option Summary Configuration Tables DTE Interface1 of DTE Interface Configuration Options Async/Sync Mode Async Nxt Async SyncAsync DTE Rate #Data Bits Nxt 8 7 9DirectMde 6DirectMde2 of DTE Interface Configuration Options Parity Bit None Nxt None Even Odd Mark Space#Stop Bits Nxt 1 3 of DTE Interface Configuration Options DTR Action IgnoreDSR Control ForcedOn 4 of DTE Interface Configuration Options DSR Control cont’dRTS Action Ignore Nxt Ignore StndrdRS232 SimCntlCar CntlCar 5 of DTE Interface Configuration Options RTS/CTS Delay 0 msec Nxt 0msec 10msec 50msec 150msec 600msecCTS Control ForcedOn Nxt ForcedOn StndrdRS232 WinkWhenDisc FollowsDTR 6 of DTE Interface Configuration Options LSD Control StndrdRS232BridgeRetrain TX Clock Source Internal Nxt Internal External RXCLoop7 of DTE Interface Configuration Options CT111Rate Cntl Disable Nxt Disable Fallback1 Fallback2DTE Rate=VF Disable End Disable Enable 1 of DTE Dialer Configuration Options DTE Dialer2 of DTE Dialer Configuration Options BreakForceEscap Disable Nxt Disable EnableCommandCharEcho Enable Nxt Enable Disable AT Escape Char 043 ASCI Nxt 043 ASCI3 of DTE Dialer Configuration Options Result Codes Enable Nxt Enable Disable EnableInOrigExtendResltCode Enable Nxt Enable Disable Add/EC Add/V42,MNP UseDTERate4 of DTE Dialer Configuration Options AT Cmnd Mode Normal Nxt Normal NoERROR NoStrapOrERRResultCode Form Words Nxt Words Numbers 1 Numbers V25bis Coding ASCII Nxt ASCII EBCDIC5 of DTE Dialer Configuration Options DTR Cont Repeat Disable End Disable EnableV.25b NewLineChr CR+LF Nxt CR+LF CR LF 1 of Line Dialer Configuration Options Line Dialer2 of Line Dialer Configuration Options BusyTone Detect Enable Nxt Enable DisableBlind Dial Paus 2sec Nxt 2sec 4sec 6sec 8sec 10sec 20sec ‘‘,” Pause Time 2sec Nxt 2sec 4sec 6sec 8sec 10sec 20sec3 of Line Dialer Configuration Options Fast Disconnect Disable Nxt Disable EnableLine Crnt Disc Enab8msec Nxt Enab8msec Enab90msec Disable Long Space Disc Enable Nxt Enable Disable4 of Line Dialer Configuration Options No Carrier Disc 2sec Nxt 2sec 5sec Disable 10sec 20secNo Data Disc Disable Nxt Disable 10min 30min 60min NoDataDiscTrig Nxt TXD or RXD TXD and RXD TXD Only RXD Only5 of Line Dialer Configuration Options Auto Make Busy Disable Nxt Disable EnableMakeBusyViaDTR Disable Nxt Disable Enable DTR Auto Redial1 of Dial Line Configuration Options Dial Line2 of Dial Line Configuration Options V32bis Autorate Enable Nxt Enable Disable StartAt48 StartAt96V22b Guard Tone Disable Nxt Disable 550Hz 1800Hz Dial TX Level Permissv3 of Dial Line Configuration Options FallFwdDelay Disable End Disable 5mins 15mins 1hourV32bis Train Long Nxt Long Short 1 of Leased Line Configuration Options Leased Line2 of Leased Line Configuration Options V32bis Autorate Enable Nxt Enable Disable2W SQ Retrain Disable Nxt Disable 1 2 3 4 1800HzTrainTone Disable Nxt Disable Enable3 of Leased Line Configuration Options BdLn Auto Orig Disable Nxt Disable Enable FastBackup 2min 5min 10min4 of Leased Line Configuration Options Rate Auto Orig DisableAuto Redial 5 of Leased Line Configuration Options AutoDialStandby DisableV29 TrainOnData Disable Nxt Disable Enable FallFwdDelay Disable End Disable 5mins 15mins 1hour1 of V.42/MNP/Buffer Configuration Options V.42/MNP/Buffer2 of V.42/MNP/Buffer Configuration Options Err Contrl Mode contV42bis Compress Enable Nxt Enable Disable MNP5 Compress Enable Nxt Enable Disable3 of V.42/MNP/Buffer Configuration Options EC Negotiat Bfr Disable Nxt Disable Enable Disab&SwitchFlw Cntl of DTE CTStoDTE Nxt CTStoDTE Disable XON/XOFF EC Fallbck Char 013 ASCI Nxt 013 ASCI4 of V.42/MNP/Buffer Configuration Options Flw Cntl of Mdm Disable Nxt Disable XON/XOFF RTStoMdmXON/XOFF Psthru Disable Nxt Disable Enable Mdm/Mdm FlowCtl Disable Nxt Disable Enable5 of V.42/MNP/Buffer Configuration Options TXBuffDiscDelay 10sec Nxt 10sec 60sec DisableBreak Buffr Ctl KeepData Nxt KeepData DiscardData Send Break Cntl DataFirst Nxt DataFirst BreakFirst6 of V.42/MNP/Buffer Configuration Options RxBuffDiscDelay Disable Nxt 0sec 60sec DisableCellularEnhance End Disable Enable Max Frame Size Nxt 256 192 128 64 321 of Test Configuration Options Tests2 of Test Configuration Options V54 Address Disable Nxt Disable Address ValuesV54 Device Type Peripheral End Peripheral Intermediate 1 of Miscellaneous Configuration Options Misc2 of Miscellaneous Configuration Options Speaker Volume Medium Nxt Medium Low HighAccess frm Remt Enable Nxt Enable Disable Dir#1Callback Disable Nxt Disable Enable3 of Miscellaneous Configuration Options Nxt CallCnct&Prg Disable CallCnctOnly CallProgOnlyNMS DTR Alarm Disable Nxt Disable Enable NetMngmtAddress 256 Nxt4 of Miscellaneous Configuration Options CellulrRJ11Adpt Disable End Disable EnableNetworkPosition Tributary Nxt Tributary Control Security Configuration Options 1 of Security Configuration Options2 of Security Configuration Options GetUserID Disable Nxt Disable EnableDTEPWBkSpChar 008 Nxt NMSReporting NxtControl Branch Control BranchIdle Control Remote OverviewReset SpeakerAT Command Equivalent AT Command EquivalentService Line/Disconnect Service Line Control Reset MakeBusyMake Busy Command Complete Control ServiceLineDownLoad Code Clone To Remote14,400 bps = 10 minutes 9600 bps = 15 minutes AT Command EquivalentWarning Download ReprogramRemote RemClone Status Establish RemoteRemClone Status Initializing RemClone Status Bank 1 xxxx/yyyyAutomatic Firmware Download To Local via DTEDownload Failure Remote Branch OverviewRemote Remote Branch Online Control ExitRem Figure 11-1. Top-Level Menu of a Remote 3800 Series ModemCOMSPHERE 3800 Series Modems September11-4 3810-A2-GB30-30Security OverviewOriginate Access Security Answer Access SecurityVF-Side Passwords PRESS EnterDTE-Side Passwords Combination of VF-Side and DTE-Side PasswordsTYPE abc123 PRESS Enter Security Branch SecuritySet Access Ctrl Administrative PasswordAccess Ctrl EditPasswdTableSelect Index Ent Access CtrlEdit Password Table Group Options PsWdType Nxt Cleared DTEEntry VFEntry VFplusDTEEdit PsWd Nxt yyyyyyyy or zzzzzz Save Edit? Edit Save Yes NoSet Answer Sec Set Answer Security Group OptionsSet Orig Sec Set Originate Security Group OptionsSet Admin PsWd Reset SecuritySecurity Password Entry Techniques Answer Access Password VF-Side and DTE-Side Entry TechniquesPRESS Enter Originate Access Password Using VF-Side PasswordsVF Password Only PasswordSecurity Database Table Using DTE-Side Passwords DTE Password OnlySecurity Database Table Using Both VF-Side and DTE-Side Passwords VF and DTE PasswordsSecurity Database Table Using Paired VF-Side and DTE-Side Passwords VF and DTE PasswordsPassword IndexFax Operation Fax OperationOverview The DCP is disabled during fax operation AT Command Set and S-Registers14 Switching Between Data Mode and Online Command ModeOperating Modes Escape Sequence and Escape Guard TimeCommand Guidelines AT Command ListTYPE ATO PRESS Enter AT Command Format 3800 Series AT CommandsCommand TYPE3800 Series AT Commands CommandCommand Character Echo Hook Switch Control3800 Series AT Commands Command3 of Description4 of 3800 Series AT Commands Front PanelCommand Configuration Options5 of 3800 Series AT CommandsCommand Reset and Load Active6 of 3800 Series AT Commands CommandSelect Factory Default Configuration Options Command Value7 of 3800 Series AT CommandsCommand Leased Mode8 of 3800 Series AT Commands CommandAsync/Sync Mode and DTE Dialer Type Description9 of 3800 Series AT Commands CommandView Configuration Options Description10 of 3800 Series AT CommandsCommand Error Control Negotiate Buffer11 of 3800 Series AT Commands CommandNo Data Disconnect Timer Error Control Fallback Character12 of 3800 Series AT CommandsCommand DescriptionS-Register List S-Register FormatTYPE ATSn? TYPE ATSn=r2 of 3800 Series S-Registers No Answer TimeoutS-Register Description3 of 3800 Series S-Registers Test TimeoutRTS-to-CTS Delay S-Register4 of 3800 Series S-Registers S-RegisterDescription Front Panel Branch5 of 3800 Series S-Registers Receive Buffer Disconnect DelayS-Register Description6 of 3800 Series S-Registers S-RegisterDescription Front Panel Branch7 of 3800 Series S-Registers Transmit Buffer Disconnect DelayS-Register Description8 of 3800 Series S-Registers Access From RemoteRemote Access Password Remote Access Password9 of 3800 Series S-Registers S-RegisterDescription Front Panel Branch10 of 3800 Series S-Registers DTR Alarm ReportingNo Data Disconnect Trigger Signal S-Register11 of 3800 Series S-Registers AT Command ModeStraps When Disconnected S-Register12 of 3800 Series S-Registers S-RegisterDescription Front Panel BranchMenu Tree A OverviewCOMSPHERE 3800 Series Modems 2400V22bis1200V22 1200212AMenu Tree V42/MNPorBfrV42/MNPorDsc MNP or BuffrExitRem appears instead of Remote when using Remote Mode Admin Password?SetAnswerSec SetAdminPsWd ResetResult Codes B Table B-1 1 of Result CodesNumbers WordTable B-1 2 of Result Codes NumbersNumbers WordTroubleshooting C SymptomTable C-1 Modem HealthTable C-2 Modem - DTE ConnectionModem - VF Connection SymptomSymptom 2 ofModem - VF Connection ActionDial Backup Operation Table C-4Online Operation Table C-5Technical Specifications D Technical SpecificationsTable D-1 1 of Technical Specifications for 3800 Series Modems SpecificationsTable D-1 2 of Technical Specifications for 3800 Series Modems SpecificationsAC POWER REQUIREMENTS POWER CONSUMPTIONTable D-1 3 of Technical Specifications for 3800 Series Modems SpecificationsDIMENSIONS DescriptionTable D-1 4 of Technical Specifications for 3800 Series Modems SpecificationsERROR CONTROL DescriptionVF Connector Pin Assignments 1. 2- wire operations 2. 4-wire operations w/o TEK leads3. 4-wire operations with TEK leads Figure E-1. Wiring Diagram - 8-Position to 6-Position Crossover CableTable E-1 VF Connector Pin Assignments Models 3810 and 3810 Dial Connector3820 Dial/Leased Connector Connector J6Signal EIA-232-D Pin AssignmentsTable E-3 EIA-232-D Pin Assignments RS-232Signal Source EIA RS-366-A Pin AssignmentsTable E-4 EIA RS-366-A Pin Assignments RS-366-AITU-T V.25bis Dialing Commands F and Response Call Request CommandsCall Request with Number Provided CRN OverviewCall Answer Commands Call Connecting CNXWhere xx is Call ResponseCommand Response Program Normal PRNRequest List of Stored Numbers RLN List Stored Number Response LSNTable F-1 V.25bis Commands V.25bis CommandAT Command Result Code Equivalent EquivalentDefault Configuration Options G Table G-1 1 of Factory Default Configuration OptionsConfiguration Option Answer/Originate ModeTable G-1 2 of Factory Default Configuration Options Async Dial and UNIX Dial Default SettingsSync Dial Default Settings Sync Leased Answer/Originate Mode Default SettingsTable G-1 3 of Factory Default Configuration Options Configuration OptionAsync Dial and UNIX Dial Default Settings Sync Dial Default SettingsTable G-1 4 of Factory Default Configuration Options Configuration OptionAsync Dial and UNIX Dial Default Settings Sync Dial Default SettingsFeature/Part Number Equipment List HEquipment 3810-A1-001COMSPHERE 3800 Series Modems September3810-A2-GB30-30 Glossary enabled Glossary Glossary-3demodulation Erasable programmable read-only memory ITU-T ITU-T V.22bis ITU-T V.27ter ITU-T ITU-T ITU-T V.32bis ITU-T ITU-T V.42bis ITU-T JM8 keypad LCD leased line LEDlocal analog loopback long space disconnect loopback test LSD menu treeoff-hook on-hook Originate mode parity PBX permissive interface power-up self-test product code programmable interface protocol PSTNMNP modem modulation network network address NIM NMS physical addresspulse dialing Sync Dial COMSPHERE 3800 Series Modems Glossary-10September 3810-A2-GB30-30Index NumbersPage Page Page Page Page Set Admin PsWd 00282600Seepage 3810-A2-GB30-30 3810-A2-GB30-30