Paradyne manual 6 of 3800 Series S-Registers, Description, Front Panel Branch, Leased-Line Rate

COMSPHERE 3800 Series Modems

S-Register

Table 14-2

(6 of 12)

3800 Series S-Registers

Description Front Panel Branch

S44	Leased-Line Rate			Configure\Edit\Leased Line
	Register determines the modem’s data rate and modulation scheme for
	operation on either 2-wire or 4-wire leased lines in either Answer or
	Originate mode.
	Register has the following values:
	0, 1	=	14,400 (V.32bis)
	2	=	12,000 (V.32bis)
	3	=	9600 (V.32bis)
	4	=	7200 (V.32bis)
	5	=	4800 (V.32bis)
	6	=	2400 (V.22bis)
	11	= 14,400 (V.33) Valid only if V.33 Option installed.
	12	= 12,000 (V.33) Valid only if V.33 Option installed.
	13	= 9600 (V.29) Valid only if V.29 Option installed.
	14	= 7200 (V.29) Valid only if V.29 Option installed.
	15	= 4800 (V.29) Valid only if V.29 Option installed.
	18	=	19,200 (V.32terbo)
	19	=	16,800 (V.32terbo)
	Factory setting is 19,200 (V.32terbo).
S45	Leased TX Level			Configure\Edit\Leased Line
	Register determines the modem’s transmit power output level over
	leased lines.
	Enter a value from 0 to 15 dBm.
	Factory setting is 0 dBm.
S46	Bad Lines Auto Originate			Configure\Edit\Leased Line
	Register determines if the modem performs an automatic dial backup if
	the leased lines fail.
	Register has the following values:
	0 = Disable
	1 = 30 seconds
	2 = 20 seconds
	3 = 60 seconds
	4 = 90 seconds
	5 = 120 seconds
	S	S
	S	S
	21 = 600 seconds
	Factory setting is Disable. Note that the S46 = 2 command has an effect
	that is out of sequence with the other values.
S47	Auto Dial Standby			Configure\Edit\Leased Line
	Register determines if the modem performs an automatic dial standby if
	in Dial Backup mode.
	Register has the following values:
	0 = Disable
	1 = 15 minutes
	2 = 1 hour
	3 = 4 hours
	255 = Test(2min)
	Factory setting is Disable.

14-20 September 1998 3810-A2-GB30-30